XMVR VA

Pressure gauge connection fitting

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP cylindrical internal threads
Connection 2 metric cylindrical outer thread
Design Pressure gauge connection fitting
Material Stainless steel
Scope of supply with edge sealing ring (socket without union nut and cutting ring)
Sealing form 1 Edge sealing ring
Sealing form 2 24° inner cone

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm G2 i mm L2 mm Operating pressure AF mm G1 Series Ø d2 mm
Product Name L1 mm G2 i mm L2 mm Operating pressure AF mm G1 Series Ø d2 mm
XMVR NW 04 HL VA 29 M 12 x 1,5 14.5 22.0 PN 315 19 G 1/4" -19 L 6
XMVR NW 04 HL 1/2 VA 36 M 12 x 1,5 20.0 29.0 PN 315 27 G 1/2" -14 L 6
XMVR NW 06 HL VA 29 M 14 x 1.5 14.5 22.0 PN 315 19 G 1/4" -19 L 8
XMVR NW 06 HL 1/2 VA 36 M 14 x 1.5 20.0 29.0 PN 315 27 G 1/2" -14 L 8
XMVR NW 08 HL VA 30 M 16 x 1.5 14.5 23.0 PN 315 19 G 1/4" -19 L 10
XMVR NW 08 HL 1/2 VA 37 M 16 x 1.5 20.0 30.0 PN 315 27 G 1/2" -14 L 10
XMVR NW 10 HL VA 30 M 18 x 1.5 14.5 23.0 PN 315 19 G 1/4" -19 L 12
XMVR NW 10 HL 1/2 VA 37 M 18 x 1.5 20.0 30.0 PN 315 27 G 1/2" -14 L 12
XMVR NW 03 HS VA 38 M 14 x 1.5 20.0 31.0 PN 630 27 G 1/2" -14 S 6
XMVR NW 04 HS VA 38 M 16 x 1.5 20.0 31.0 PN 630 27 G 1/2" -14 S 8
XMVR NW 06 HS VA 38 M 18 x 1.5 20.0 30.5 PN 630 27 G 1/2" -14 S 10
XMVR NW 08 HS VA 38 M 20 x 1.5 20.0 30.5 PN 630 27 G 1/2" -14 S 12
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.