XNEL

Fitting, L shaped



Properties

Connection 1 Pipe socket not pre-assembled
Connection 2 + 3 metric cylindrical outer thread
Design Adjustable direction fitting
Construction L shaped
Sealing form 1 Cutting ring connection
Sealing form 2 + 3 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 L1 mm L2 mm L7 mm AF mm
Product Name Series Operating pressure Ø d2 mm G1 L1 mm L2 mm L7 mm AF mm
XNEL NW 04 HL L PN 315 6 M 12 x 1.5 26,0 12,0 19 12
XNEL NW 06 HL L PN 315 8 M 14 x 1.5 27,5 14,0 21 12
XNEL NW 08 HL L PN 315 10 M 16 x 1.5 29,0 15,0 22 14
XNEL NW 10 HL L PN 315 12 M 18 x 1.5 29,5 17,0 24 17
XNEL NW 13 HL L PN 315 15 M 22 x 1.5 32,5 21,0 28 19
XNEL NW 16 HL L PN 315 18 M 26 x 1.5 35,5 23,5 31 24
XNEL NW 20 HL L PN 160 22 M 30 x 2 38,5 27,5 35 27
XNEL NW 25 HL L PN 160 28 M 36 x 2 41,5 30,5 38 36
XNEL NW 32 HL L PN 160 35 M 45 x 2 51,0 34,5 45 41
XNEL NW 40 HL L PN 160 42 M 52 x 2 56,0 40,0 51 50
XNEL NW 03 HS S PN 630 6 M 14 x 1.5 29,0 16,0 23 12
XNEL NW 04 HS S PN 630 8 M 16 x 1.5 27,5 17,0 24 14
XNEL NW 06 HS S PN 630 10 M 18 x 1.5 30,0 17,5 25 17
XNEL NW 08 HS S PN 630 12 M 20 x 1.5 31,0 21,5 29 17
XNEL NW 10 HS S PN 630 14 M 22 x 1.5 35,0 22,0 30 19
XNEL NW 13 HS S PN 400 16 M 24 x 1.5 36,5 24,5 33 24
XNEL NW 16 HS S PN 400 20 M 30 x 2 44,5 26,5 37 27
XNEL NW 20 HS S PN 400 25 M 36 x 2 50,0 30,0 42 36
XNEL NW 25 HS S PN 400 30 M 42 x 2 55,0 35,5 49 41
XNEL NW 32 HS S PN 315 38 M 52 x 2 63,0 41,0 57 50
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.