XNEL VA

Fitting, L shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 Pipe socket not pre-assembled
Connection 2 + 3 metric cylindrical outer thread
Construction L shaped
Design Adjustable direction fitting
Material Stainless steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Cutting ring connection
Sealing form 2 + 3 24° inner cone

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm L2 mm L7 mm External pipe Ø mm Operating pressure AF mm G1 Series Ø d2 mm
Product Name L1 mm L2 mm L7 mm External pipe Ø mm Operating pressure AF mm G1 Series Ø d2 mm
XNEL NW 04 HL VA 26.0 12.0 19 Fitting, L shaped; Stainless steel 6 PN 315 12 M 12 x 1,5 L 6
XNEL NW 06 HL VA 27.5 14.0 21 Fitting, L shaped; Stainless steel 8 PN 315 12 M 14 x 1.5 L 8
XNEL NW 08 HL VA 29.0 15.0 22 Fitting, L shaped; Stainless steel 10 PN 315 14 M 16 x 1.5 L 10
XNEL NW 10 HL VA 29.5 17.0 24 Fitting, L shaped; Stainless steel 12 PN 315 17 M 18 x 1.5 L 12
XNEL NW 13 HL VA 32.5 21.0 28 Fitting, L shaped; Stainless steel 15 PN 315 19 M 22 x 1.5 L 15
XNEL NW 16 HL VA 35.5 23.5 31 Fitting, L shaped; Stainless steel 18 PN 315 24 M 26 x 1.5 L 18
XNEL NW 20 HL VA 38.5 27.5 35 Fitting, L shaped; Stainless steel 22 PN 160 27 M 30 x 2 L 22
XNEL NW 25 HL VA 41.5 30.5 38 Fitting, L shaped; Stainless steel 28 PN 160 36 M 36 x 2 L 28
XNEL NW 32 HL VA 51.0 34.5 45 Fitting, L shaped; Stainless steel 35 PN 160 41 M 45 x 2 L 35
XNEL NW 40 HL VA 56.0 40.0 51 Fitting, L shaped; Stainless steel 42 PN 160 50 M 52 x 2 L 42
XNEL NW 03 HS VA 29.0 16.0 23 Fitting, L shaped; Stainless steel 6 PN 630 12 M 14 x 1.5 S 6
XNEL NW 04 HS VA 27.5 17.0 24 Fitting, L shaped; Stainless steel 8 PN 630 14 M 16 x 1.5 S 8
XNEL NW 06 HS VA 30.0 17.5 25 Fitting, L shaped; Stainless steel 10 PN 630 17 M 18 x 1.5 S 10
XNEL NW 08 HS VA 31.0 21.5 29 Fitting, L shaped; Stainless steel 12 PN 630 17 M 20 x 1.5 S 12
XNEL NW 10 HS VA 35.0 22.0 30 Fitting, L shaped; Stainless steel 14 PN 630 19 M 22 x 1.5 S 14
XNEL NW 13 HS VA 36.5 24.5 33 Fitting, L shaped; Stainless steel 16 PN 400 24 M 24 x 1.5 S 16
XNEL NW 16 HS VA 44.5 26.5 37 Fitting, L shaped; Stainless steel 20 PN 400 27 M 30 x 2 S 20
XNEL NW 20 HS VA 50.0 30.0 42 Fitting, L shaped; Stainless steel 25 PN 400 36 M 36 x 2 S 25
XNEL NW 25 HS VA 55.0 35.5 49 Fitting, L shaped; Stainless steel 30 PN 400 41 M 42 x 2 S 30
XNEL NW 32 HS VA 63.0 41.0 57 Fitting, L shaped; Stainless steel 38 PN 315 50 M 52 x 2 S 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure
Ø d2 = External pipe diameter
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.