XNEW

Fitting, angle 90°



Properties

Connection 1 Pipe socket not pre-assembled
Connection 2 metric cylindrical outer thread
Design Adjustable direction fitting
Construction Angle 90°
Sealing form 1 Cutting ring connection
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm M L1 mm L2 mm L7 mm AF mm S1
Product Name Series Operating pressure Ø d2 mm M L1 mm L2 mm L7 mm AF mm S1
XNEW NW 04 HL L PN 315 6 M 12 x 1.5 26,0 12,0 19 12 14
XNEW NW 06 HL L PN 315 8 M 14 x 1.5 27,5 14,0 21 12 17
XNEW NW 08 HL L PN 315 10 M 16 x 1.5 29,0 15,0 22 14 19
XNEW NW 10 HL L PN 315 12 M 18 x 1.5 29,5 17,0 24 17 22
XNEW NW 13 HL L PN 315 15 M 22 x 1.5 32,5 21,0 28 19 27
XNEW NW 16 HL L PN 315 18 M 26 x 1.5 35,5 23,5 31 24 32
XNEW NW 20 HL L PN 160 22 M 30 x 2 38,5 27,5 35 27 36
XNEW NW 25 HL L PN 160 28 M 36 x 2 42,0 30,5 38 36 41
XNEW NW 32 HL L PN 160 35 M 45 x 2 51,0 34,5 45 41 50
XNEW NW 40 HL L PN 160 42 M 52 x 2 60,0 40,0 51 50 60
XNEW NW 03 HS S PN 630 6 M 14 x 1.5 27,0 16,0 23 12 17
XNEW NW 04 HS S PN 630 8 M 16 x 1.5 27,5 17,0 24 14 19
XNEW NW 06 HS S PN 630 10 M 18 x 1.5 31,0 17,5 25 17 22
XNEW NW 08 HS S PN 630 12 M 20 x 1.5 31,0 21,5 29 17 24
XNEW NW 10 HS S PN 630 14 M 22 x 1.5 35,0 22,0 30 19 27
XNEW NW 13 HS S PN 400 16 M 24 x 1.5 34,5 24,5 33 24 30
XNEW NW 16 HS S PN 400 20 M 30 x 2 44,5 26,5 37 27 36
XNEW NW 20 HS S PN 400 25 M 36 x 2 50,0 30,0 42 36 46
XNEW NW 25 HS S PN 400 30 M 42 x 2 55,0 35,5 49 41 50
XNEW NW 32 HS S PN 315 38 M 52 x 2 66,5 41,0 57 50 60
PN = Nominal pressure PB = Max. operating pressure - Series: LL = Very light L = Light S = Heavy - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.