XNEW VA

Fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 Pipe socket not pre-assembled
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Design Adjustable direction fitting
Material Stainless steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Cutting ring connection
Sealing form 2 24° inner cone
Standard ISO 8434-1

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L7 mm L1 mm L2 mm Operating pressure External pipe Ø mm S1 AF mm Series M Ø d2 mm
Product Name L7 mm L1 mm L2 mm Operating pressure External pipe Ø mm S1 AF mm Series M Ø d2 mm
XNEW NW 04 HL VA 19 26.0 12.0 PN 315 6 14 12 L M 12 x 1.5 6
XNEW NW 06 HL VA 21 27.5 14.0 PN 315 8 17 12 L M 14 x 1.5 8
XNEW NW 08 HL VA 22 29.0 15.0 PN 315 10 19 14 L M 16 x 1.5 10
XNEW NW 10 HL VA 24 29.5 17.0 PN 315 12 22 17 L M 18 x 1.5 12
XNEW NW 13 HL VA 28 32.5 21.0 PN 315 15 27 19 L M 22 x 1.5 15
XNEW NW 16 HL VA 31 35.5 23.5 PN 315 18 32 24 L M 26 x 1.5 18
XNEW NW 20 HL VA 35 38.5 27.5 PN 160 22 36 27 L M 30 x 2 22
XNEW NW 25 HL VA 38 42.0 30.5 PN 160 28 41 36 L M 36 x 2 28
XNEW NW 32 HL VA 45 51.0 34.5 PN 160 35 50 41 L M 45 x 2 35
XNEW NW 40 HL VA 51 60.0 40.0 PN 160 42 60 50 L M 52 x 2 42
XNEW NW 03 HS VA 23 27.0 16.0 PN 630 6 17 12 S M 14 x 1.5 6
XNEW NW 04 HS VA 24 27.5 17.0 PN 630 8 19 14 S M 16 x 1.5 8
XNEW NW 06 HS VA 25 31.0 17.5 PN 630 10 22 17 S M 18 x 1.5 10
XNEW NW 08 HS VA 29 31.0 21.5 PN 630 12 24 17 S M 20 x 1.5 12
XNEW NW 10 HS VA 30 35.0 22.0 PN 630 14 27 19 S M 22 x 1.5 14
XNEW NW 13 HS VA 33 34.5 24.5 PN 400 16 30 24 S M 24 x 1.5 16
XNEW NW 16 HS VA 37 44.5 26.5 PN 400 20 36 27 S M 30 x 2 20
XNEW NW 20 HS VA 42 50.0 30.0 PN 400 25 46 36 S M 36 x 2 25
XNEW NW 25 HS VA 49 55.0 35.5 PN 400 30 50 41 S M 42 x 2 30
XNEW NW 32 HS VA 57 66.5 41.0 PN 315 38 60 50 S M 52 x 2 38
PN = Nominal pressure PB = Max. operating pressure
Series: LL = Very light L = Light S = Heavy
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.