XRD

Non-return valve, connector



Properties

Connection 1 + 2 metric cylindrical outer thread
Design Non-return valve, connector
Construction straight
Sealing form 1 + 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 3865
Surface electro galvanised
Material Steel

Description

Opening pressure: approx. 1 bar

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Opening pressure Series Operating pressure Ø d2 mm G1 L1 mm L2 mm S1 S2
Product Name Opening pressure Series Operating pressure Ø d2 mm G1 L1 mm L2 mm S1 S2
XRD NW 04 HL approx. 1 bar L PN 250 6 M 12 x 1.5 58,0 29,0 17 17
XRD NW 06 HL approx. 1 bar L PN 250 8 M 14 x 1.5 59,0 30,0 19 19
XRD NW 08 HL approx. 1 bar L PN 250 10 M 16 x 1.5 69,5 40,5 24 22
XRD NW 10 HL approx. 1 bar L PN 250 12 M 18 x 1.5 72,5 43,5 30 27
XRD NW 13 HL approx. 1 bar L PN 250 15 M 22 x 1.5 77,5 47,5 32 27
XRD NW 16 HL approx. 1 bar L PN 160 18 M 26 x 1.5 83,5 51,5 36 36
XRD NW 20 HL approx. 1 bar L PN 160 22 M 30 x 2 93,5 61,5 46 41
XRD NW 25 HL approx. 1 bar L PN 100 28 M 36 x 2 102,5 69,5 55 50
XRD NW 32 HL approx. 1 bar L PN 100 35 M 45 x 2 117,5 74,5 60 60
XRD NW 40 HL approx. 1 bar L PN 100 42 M 52 x 2 119,0 74,0 70 65
XRD NW 03 HS approx. 1 bar S PN 400 6 M 14 x 1.5 63,5 34,5 19 17
XRD NW 04 HS approx. 1 bar S PN 400 8 M 16 x 1.5 63,5 34,5 19 17
XRD NW 06 HS approx. 1 bar S PN 400 10 M 18 x 1.5 72,5 40,5 24 22
XRD NW 08 HS approx. 1 bar S PN 400 12 M 20 x 1.5 74,5 42,5 27 24
XRD NW 10 HS approx. 1 bar S PN 315 14 M 22 x 1.5 82,5 47,5 32 27
XRD NW 13 HS approx. 1 bar S PN 315 16 M 24 x 1.5 86,5 50,5 36 32
XRD NW 16 HS approx. 1 bar S PN 250 20 M 30 x 2 97,5 54,5 41 38
XRD NW 20 HS approx. 1 bar S PN 250 25 M 36 x 2 106,5 58,5 50 46
XRD NW 25 HS approx. 1 bar S PN 250 30 M 42 x 2 122,5 69,5 60 55
XRD NW 32 HS approx. 1 bar S PN 250 38 M 52 x 2 136,5 75,5 70 65
Ø = External pipe diameter - Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure

Order hints

Also available with opening pressure of 0.2; 0.5; 2; 3; 5 bar.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.