XRD VA

Non-return valve, connector



Properties

Connection 1 + 2 metric cylindrical outer thread
Design Non-return valve, connector
Sealing form 1 + 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 3865
Material Stainless steel

Description

Opening pressure: approx. 1 bar

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Opening pressure Series Operating pressure Ø d2 mm L1 mm L2 mm S1 S2 S3
Product Name Opening pressure Series Operating pressure Ø d2 mm L1 mm L2 mm S1 S2 S3
XRD NW 04 HL VA approx. 1 bar L PN 250 6 58,0 29,0 19 17 14
XRD NW 06 HL VA approx. 1 bar L PN 250 8 59,0 30,0 24 22 17
XRD NW 08 HL VA approx. 1 bar L PN 250 10 69,5 40,5 27 24 19
XRD NW 10 HL VA approx. 1 bar L PN 250 12 72,5 43,5 30 27 22
XRD NW 13 HL VA approx. 1 bar L PN 250 15 77,5 47,5 36 32 27
XRD NW 16 HL VA approx. 1 bar L PN 160 18 83,5 51,5 41 38 32
XRD NW 20 HL VA approx. 1 bar L PN 160 22 93,5 61,5 50 46 36
XRD NW 25 HL VA approx. 1 bar L PN 100 28 102,5 69,5 60 55 41
XRD NW 32 HL VA approx. 1 bar L PN 100 35 117,5 74,5 70 65 50
XRD NW 40 HL VA approx. 1 bar L PN 100 42 119,0 74,0 70 65 60
XRD NW 03 HS VA approx. 1 bar S PN 400 6 63,5 34,5 19 17 17
XRD NW 04 HS VA approx. 1 bar S PN 400 8 63,5 34,5 19 17 19
XRD NW 06 HS VA approx. 1 bar S PN 400 10 72,5 40,5 24 22 22
XRD NW 08 HS VA approx. 1 bar S PN 400 12 74,5 42,5 27 24 24
XRD NW 10 HS VA approx. 1 bar S PN 315 14 82,5 47,5 32 27 27
XRD NW 13 HS VA approx. 1 bar S PN 315 16 86,5 50,5 36 32 30
XRD NW 16 HS VA approx. 1 bar S PN 250 20 97,5 54,5 41 38 36
XRD NW 20 HS VA approx. 1 bar S PN 250 25 106,5 58,5 50 46 46
XRD NW 25 HS VA approx. 1 bar S PN 250 30 122,5 69,5 60 55 50
XRD NW 32 HS VA approx. 1 bar S PN 250 38 136,5 75,5 70 65 60
Ø = External pipe diameter - Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure

Order hints

Also available with opening pressure of 0.2; 0.5; 2; 3; 5 bar.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.