XSA

Welded on fitting

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 Welded on socket for metric pipe
Connection 2 metric cylindrical outer thread
Construction straight
Design Welded on fitting
Lieferumfang Socket (without union nut and cutting ring)
Material Steel
Online-Shop https://shop.hansa-flex.com/de/XSA
Sealing form 2 24° inner cone
Standard ISO 8434-1
Surface phosphate treated and oiled (Znphr5f)

Hints

Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen.

Article Table

Product Name L1 mm L2 mm Betriebsdruck Rohr-Außen Ø mm SW mm Baureihe Ø d2 mm Ø D1 mm
Product Name L1 mm L2 mm Betriebsdruck Rohr-Außen Ø mm SW mm Baureihe Ø d2 mm Ø D1 mm
XSANW04HL 21 mm 14.0 mm PN 315 6 mm 14 mm L 6 mm 10 mm
XSANW06HL 23 mm 16.0 mm PN 315 8 mm 14 mm L 8 mm 12 mm
XSANW08HL 25 mm 18.0 mm PN 315 10 mm 17 mm L 10 mm 14 mm
XSANW10HL 25 mm 18.0 mm PN 315 12 mm 19 mm L 12 mm 16 mm
XSANW13HL 29 mm 22.0 mm PN 315 15 mm 22 mm L 15 mm 19 mm
XSANW16HL 31 mm 23.5 mm PN 315 18 mm 27 mm L 18 mm 22 mm
XSANW20HL 36 mm 28.5 mm PN 160 22 mm 32 mm L 22 mm 27 mm
XSANW25HL 38 mm 30.5 mm PN 160 28 mm 41 mm L 28 mm 32 mm
XSANW32HL 43 mm 32.5 mm PN 160 35 mm 46 mm L 35 mm 40 mm
XSANW40HL 46 mm 35.0 mm PN 160 42 mm 55 mm L 42 mm 46 mm
XSANW03HS 26 mm 19.0 mm PN 630 6 mm 14 mm S 6 mm 11 mm
XSANW04HS 28 mm 21.0 mm PN 630 8 mm 17 mm S 8 mm 13 mm
XSANW06HS 30 mm 22.5 mm PN 630 10 mm 19 mm S 10 mm 15 mm
XSANW08HS 32 mm 24.5 mm PN 630 12 mm 22 mm S 12 mm 17 mm
XSANW10HS 35 mm 27.0 mm PN 630 14 mm 24 mm S 14 mm 19 mm
XSANW13HS 35 mm 26.5 mm PN 400 16 mm 27 mm S 16 mm 21 mm
XSANW16HS 40 mm 29.5 mm PN 400 20 mm 32 mm S 20 mm 26 mm
XSANW20HS 44 mm 32.0 mm PN 400 25 mm 41 mm S 25 mm 31 mm
XSANW25HS 49 mm 35.5 mm PN 400 30 mm 46 mm S 30 mm 36 mm
XSANW32HS 54 mm 38.0 mm PN 315 38 mm 55 mm S 38 mm 44 mm
Series: LL = Very light L = Light S = Heavy, PN = Nominal pressure PB = Max. operating pressure, Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.