XS AK 353

Moulded seals XS AK 353

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design Sealing ring
Max. operating pressure up to 500 bar
Temp. range PU18: -30 °C bis +100 °C
PU33: -40 °C bis + 120 °C

Description

O-ring grooves according to ISO standards may be manufactured in a wide range of dimensions. For sections of 3.53 mm, the groove depth varies according to ISO 2.7 to 3.1 mm. For the best possible seal in all dimension ranges this seal has been developed that can replace conventional O-rings.
Interchangeable with O-rings
High resistance to extrusion.
no anti-extrusion ring required

Article Table

Product Name gBR(mm) LBR(mm) cross section mm Material Dbr(mm)
Product Name gBR(mm) LBR(mm) cross section mm Material Dbr(mm)
XS 40 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU33 40 to 41.9 mm
XS 42 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU18 42 to 43.9 mm
XS 44 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU33 44 to 45.9 mm
XS 46 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU18 46 to 47.9 mm
XS 48 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU18 48 to 49.9 mm
XS 50 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU33 50 to 51.9 mm
XS 52 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU18 52 to 53.9 mm
XS 54 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU33 54 to 55.9 mm
XS 56 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU18 56 to 57.9 mm
XS 58 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU18 58 to 59.9 mm
XS 60 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU33 60 to 62.9 mm
XS 63 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU33 63 to 65.9 mm
XS 66 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU18 66 to 69.9 mm
XS 70 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU33 70 to 72.9 mm
XS 73 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU33 73 to 75.9 mm
XS 76 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU18 76 to 79.9 mm
XS 80 - AK 353 2.7 to 3.1 mm 4 bis 4.8 3.53 PU33 80 to 84 mm

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.