XS AK 534

Moulded seals XS AK 534

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design Sealing ring
Max. operating pressure up to 500 bar
Temp. range PU18: -30 °C bis +100 °C
PU33: -40 °C bis + 120 °C

Description

O-ring grooves according to ISO standards may be manufactured in a wide range of dimensions. For sections of 3.53 mm, the groove depth varies according to ISO 2.7 to 3.1 mm. For the best possible seal in all dimension ranges this seal has been developed that can replace conventional O-rings.
Interchangeable with O-rings
High resistance to extrusion.
no anti-extrusion ring required

Article Table

Product Name gBR(mm) LBR(mm) cross section mm Material Dbr(mm)
Product Name gBR(mm) LBR(mm) cross section mm Material Dbr(mm)
XS 80 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU33 80 to 84.9 mm
XS 85 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU33 85 to 89.9 mm
XS 90 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU33 90 to 94.9 mm
XS 95 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 95 to 99.9 mm
XS 100 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU33 100 to 104.9 mm
XS 105 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 105 to 109.9 mm
XS 110 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU33 110 to 114.9 mm
XS 115 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 115 to 119.9 mm
XS 120 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 120 to 124.9 mm
XS 125 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 125 to 129.9 mm
XS 130 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 130 to 135.9 mm
XS 136 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 136 to 142.9 mm
XS 143 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 143 to 149.9 mm
XS 150 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 150 to 157.9 mm
XS 158 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 158 to 165.9 mm
XS 166 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 166 to 173.9 mm
XS 174 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 174 to 181.9 mm
XS 182 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 182 to 189.9 mm
XS 190 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 190 to 199.9 mm
XS 200 - AK 534 4.3 to 4.7 mm 5.9 bis 7.1 5.34 PU18 200 to 210 mm

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.