XSA VA

Welded on fitting

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 Welded on socket for metric pipe
Connection 2 metric cylindrical outer thread
Construction straight
Design Welded on fitting
Material Stainless steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 2 24° inner cone
Standard DIN 2353
ISO 8434-1

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm L2 mm Operating pressure External pipe Ø mm AF mm Series Ø d2 mm Ø D1 mm
Product Name L1 mm L2 mm Operating pressure External pipe Ø mm AF mm Series Ø d2 mm Ø D1 mm
XSA NW 04 HL VA 21 14.0 PN 315 6 14 L 6 10
XSA NW 06 HL VA 23 16.0 PN 315 8 14 L 8 12
XSA NW 08 HL VA 25 18.0 PN 315 10 17 L 10 14
XSA NW 10 HL VA 25 18.0 PN 315 12 19 L 12 16
XSA NW 13 HL VA 29 22.0 PN 315 15 22 L 15 19
XSA NW 16 HL VA 31 23.5 PN 315 18 27 L 18 22
XSA NW 20 HL VA 36 28.5 PN 160 22 32 L 22 27
XSA NW 25 HL VA 38 30.5 PN 160 28 41 L 28 32
XSA NW 32 HL VA 43 32.5 PN 160 35 46 L 35 40
XSA NW 40 HL VA 46 35.0 PN 160 42 55 L 42 46
XSA NW 03 HS VA 26 19.0 PN 630 6 14 S 6 11
XSA NW 04 HS VA 28 21.0 PN 630 8 17 S 8 13
XSA NW 06 HS VA 30 22.5 PN 630 10 19 S 10 15
XSA NW 08 HS VA 32 24.5 PN 630 12 22 S 12 17
XSA NW 10 HS VA 35 27.0 PN 630 14 24 S 14 19
XSA NW 13 HS VA 35 26.6 PN 400 16 27 S 16 21
XSA NW 16 HS VA 40 29.5 PN 400 20 32 S 20 26
XSA NW 20 HS VA 44 32.0 PN 400 25 41 S 25 31
XSA NW 25 HS VA 49 35.5 PN 400 30 46 S 30 36
XSA NW 32 HS VA 54 38.0 PN 315 38 55 S 38 44
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.