XSDOR VA

Banjo fitting, throttle free, angle 90°



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Design Banjo coupling, throttle free
Construction Angle 90°
Sealing form 1 Shape E
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 2353, ISO 8434-1
Material Stainless steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L1 mm L2 mm L4 mm L7 mm AF mm S1 OR
Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L1 mm L2 mm L4 mm L7 mm AF mm S1 OR
XSDOR 04 LL VA LL PN 100 4 G 1/8" -28 14,5 8,0 23,5 10,5 14,0 18,0 17 17 7.65 x 1.78
XSDOR 06 LL VA LL PN 100 6 G 1/8" -28 14,5 8,0 23,5 10,5 13,5 19,0 17 17 7.65 x 1.78
XSDOR 08 LL VA LL PN 100 8 G 1/8" -28 14,5 8,0 23,5 10,5 13,5 19,0 17 17 7.65 x 1.78
XSDOR NW 04 HL VA L PN 315 6 G 1/8" -28 14,5 8,0 23,5 10,5 12,0 19,0 17 17 7.65 x 1.78
XSDOR NW 06 HL VA L PN 315 8 G 1/4" -19 19,0 13,0 29,0 14,0 14,5 21,5 22 19 11.10 x 1.78
XSDOR NW 08 HL VA L PN 315 10 G 1/4" -19 19,0 12,5 29,0 14,0 15,5 22,5 22 19 11.10 x 1.78
XSDOR NW 10 HL 1/4 VA L PN 315 12 G 1/4" -19 19,0 12,0 34,0 16,5 18,0 25,0 27 19 11.10 x 1.78
XSDOR NW 10 HL VA L PN 315 12 G 3/8" -19 22,5 12,0 35,0 16,5 18,0 25,0 27 24 14.00 x 1.78
XSDOR NW 13 HL VA L PN 315 15 G 1/2" -14 27,0 12,0 46,0 21,5 21,5 28,5 32 27 18.77 x 1.78
XSDOR NW 16 HL VA L PN 315 18 G 1/2" -14 27,0 14,0 46,0 21,5 21,0 28,5 32 27 18.77 x 1.78
XSDOR NW 20 HL VA L PN 160 22 G 3/4" -14 32,5 16,0 52,0 24,0 27,5 35,0 41 36 23.81 x 2.62
XSDOR NW 25 HL VA L PN 160 28 G 1" -11 40,0 18,0 64,0 30,5 32,0 39,5 50 46 29.82 x 2.62
XSDOR NW 32 HL VA L PN 160 35 G 1.1/4" -11 50,0 20,0 75,0 35,5 36,0 46,5 60 50 37.77 x 2.62
XSDOR NW 40 HL VA L PN 160 42 G 1.1/2" -11 55,5 22,0 74,0 40,5 40,5 51,5 70 60 41.28 x 3.53
XSDOR NW 03 HS VA S PN 400 6 G 1/4" -19 19,0 13,0 29,0 14,0 16,5 23,5 22 19 11.10 x 1.78
XSDOR NW 04 HS VA S PN 400 8 G 1/4" -19 19,0 13,0 29,0 14,0 16,5 23,5 22 19 11.10 x 1.78
XSDOR NW 06 HS VA S PN 400 10 G 3/8" -19 22,5 12,0 35,5 16,5 18,5 26,0 27 24 14.00 x 1.78
XSDOR NW 08 HS VA S PN 400 12 G 3/8" -19 22,5 12,0 35,0 16,5 18,5 26,0 27 24 14.00 x 1.78
XSDOR NW 10 HS VA S PN 400 14 G 1/2" -14 27,0 12,0 46,0 21,5 22,5 30,5 30 27 18.77 x 1.78
XSDOR NW 13 HS VA S PN 315 16 G 1/2" -14 27,0 14,0 46,0 21,5 22,0 30,5 30 27 18.77 x 1.78
XSDOR NW 16 HS VA S PN 315 20 G 3/4" -14 32,5 16,0 52,0 24,0 26,5 37,0 41 36 23.81 x 2.62
XSDOR NW 20 HS VA S PN 250 25 G 1" -11 40,0 19,0 63,0 30,5 31,5 43,5 50 46 29.82 x 2.62
XSDOR NW 25 HS VA S PN 160 30 G 1.1/4" -11 50,0 20,0 75,0 35,5 37,0 50,5 60 50 37.77 x 2.62
XSDOR NW 32 HS VA S PN 160 38 G 1.1/2" -11 55,5 22,0 74,0 40,5 41,5 57,5 70 60 41.28 x 3.53
PN = Nominal pressure PB = Max. operating pressure - Series: LL = Very light L = Light S = Heavy - Ø = External pipe diameter

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.