XSDR

Banjo fitting, throttle free, angle 90°



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Design Banjo coupling, throttle free
Construction Angle 90°
Sealing form 1 Edge sealing ring
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 2353, ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L1 mm L2 mm L4 mm L7 mm AF mm S1
Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L1 mm L2 mm L4 mm L7 mm AF mm S1
XSDR NW 04 HL L PN 250 6 G 1/8" -28 14 8 24 10,5 12,0 19,0 17 17
XSDR NW 04 HL 1/4 L PN 250 6 G 1/4" -19 18 12 30 14,0 14,5 21,5 22 19
XSDR NW 06 HL L PN 250 8 G 1/4" -19 18 12 30 14,0 14,5 21,5 22 19
XSDR NW 08 HL L PN 250 10 G 1/4" -19 18 12 30 14,0 15,5 22,5 22 19
XSDR NW 10 HL 1/4 L PN 250 12 G 1/4" -19 22 12 30 14,0 15,5 22,5 22 19
XSDR NW 10 HL L PN 250 12 G 3/8" -19 22 12 36 16,5 18,0 25,0 27 24
XSDR NW 10 HL 1/2 L PN 250 12 G 1/2" -14 26 14 45 21,5 20,5 28,5 32 30
XSDR NW 13 HL L PN 250 15 G 1/2" -14 26 14 45 21,5 21,5 28,5 32 30
XSDR NW 16 HL L PN 250 18 G 1/2" -14 26 14 45 21,5 21,0 28,5 32 30
XSDR NW 20 HL L PN 160 22 G 3/4" -14 32 16 53 24,0 27,5 35,0 41 36
XSDR NW 25 HL L PN 160 28 G 1" -11 39 18 66 30,5 32,0 39,5 50 46
XSDR NW 32 HL L PN 160 35 G 1.1/4" -11 49 20 76 35,5 36,0 46,5 60 55
XSDR NW 40 HL L PN 160 42 G 1.1/2" -11 55 22 87 40,5 40,5 51,5 70 60
XSDR NW 03 HS S PN 315 6 G 1/4" -19 18 12 30 14,0 16,5 23,5 22 19
XSDR NW 04 HS S PN 315 8 G 1/4" -19 18 12 30 14,0 16,5 23,5 22 19
XSDR NW 06 HS S PN 315 10 G 3/8" -19 22 12 36 16,5 18,5 26,0 27 24
XSDR NW 08 HS S PN 315 12 G 3/8" -19 22 12 36 16,5 18,5 26,0 27 24
XSDR NW 10 HS S PN 315 14 G 1/2" -14 26 14 45 21,5 22,5 30,5 32 30
XSDR NW 13 HS S PN 315 16 G 1/2" -14 26 14 45 21,5 22,0 30,5 32 30
XSDR NW 16 HS S PN 160 20 G 3/4" -14 32 16 53 24,0 26,5 37,0 41 36
XSDR NW 20 HS S PN 160 25 G 1" -11 39 18 66 30,5 31,5 43,5 50 46
XSDR NW 25 HS S PN 160 30 G 1.1/4" -11 49 20 76 35,5 37,0 50,5 60 55
XSDR NW 32 HS S PN 160 38 G 1.1/2" -11 55 22 87 40,5 41,5 57,5 70 60
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.