XSTR

Banjo fitting, throttle free, T shaped



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 metric cylindrical outer thread
Design Banjo coupling, throttle free
Construction T shaped
Sealing form 1 Edge sealing ring
Sealing form 2 + 3 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L1 mm L2 mm L4 mm L7 mm AF mm S1
Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L1 mm L2 mm L4 mm L7 mm AF mm S1
XSTR NW 04 HL L PN 250 6 G 1/8" -28 14 8 24 10,5 12,0 19,0 17 17
XSTR NW 06 HL L PN 250 8 G 1/4" -19 18 12 30 14,0 14,5 21,5 22 19
XSTR NW 08 HL L PN 250 10 G 1/4" -19 18 12 30 14,0 15,5 22,5 22 19
XSTR NW 10 HL L PN 250 12 G 3/8" -19 22 12 36 16,5 18,0 25,0 27 24
XSTR NW 13 HL L PN 250 15 G 1/2" -14 26 14 45 21,5 21,5 28,5 32 30
XSTR NW 16 HL L PN 250 18 G 1/2" -14 26 14 45 21,5 21,0 28,5 32 30
XSTR NW 20 HL L PN 160 22 G 3/4" -14 32 16 53 24,0 27,5 35,0 41 36
XSTR NW 25 HL L PN 160 28 G 1" -11 39 18 66 30,5 32,0 39,5 50 46
XSTR NW 32 HL L PN 160 35 G 1.1/4" -11 49 20 76 35,5 36,0 46,5 60 55
XSTR NW 40 HL L PN 160 42 G 1.1/2" -11 55 22 87 40,5 40,5 51,5 70 60
XSTR NW 03 HS S PN 315 6 G 1/4" -19 18 12 30 14,0 16,5 23,5 22 19
XSTR NW 04 HS S PN 315 8 G 1/4" -19 18 12 30 14,0 16,5 23,5 22 19
XSTR NW 06 HS S PN 315 10 G 3/8" -19 22 12 36 16,5 18,5 26,0 27 24
XSTR NW 08 HS S PN 315 12 G 3/8" -19 22 12 36 16,5 18,5 26,0 27 24
XSTR NW 10 HS S PN 315 14 G 1/2" -14 26 14 45 21,5 22,5 30,5 32 30
XSTR NW 13 HS S PN 315 16 G 1/2" -14 26 14 45 21,5 22,0 30,5 32 30
XSTR NW 16 HS S PN 160 20 G 3/4" -14 32 16 53 24,0 26,5 37,0 41 36
XSTR NW 20 HS S PN 160 25 G 1" -11 39 18 66 30,5 31,5 43,5 50 46
XSTR NW 25 HS S PN 160 30 G 1.1/4" -11 49 20 76 35,5 37,0 50,5 60 55
XSTR NW 32 HS S PN 160 38 G 1.1/2" -11 55 22 87 40,5 41,5 57,5 70 60
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.