XSV VA

Bulkhead fitting

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 + 2 metric cylindrical outer thread
Construction straight
Design Bulkhead fitting
Material Stainless steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 + 2 24° inner cone
Standard DIN 2353
ISO 8434-1

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm Operating pressure External pipe Ø mm S1 AF mm G1 Series Ø d2 mm L4 mm
Product Name L2 mm Operating pressure External pipe Ø mm S1 AF mm G1 Series Ø d2 mm L4 mm
XSV NW 04 HL VA 27.0 PN 315 6 17 17 M 12 x 1,5 L 6 7.0
XSV NW 06 HL VA 27.0 PN 315 8 19 19 M 14 x 1.5 L 8 8.0
XSV NW 08 HL VA 28.0 PN 315 10 22 22 M 16 x 1.5 L 10 10.0
XSV NW 10 HL VA 29.0 PN 315 12 24 24 M 18 x 1.5 L 12 10.0
XSV NW 13 HL VA 31.0 PN 315 15 30 27 M 22 x 1.5 L 15 12.0
XSV NW 16 HL VA 32.5 PN 315 18 36 32 M 26 x 1.5 L 18 13.5
XSV NW 20 HL VA 34.5 PN 160 22 41 36 M 30 x 2 L 22 16.5
XSV NW 25 HL VA 35.5 PN 160 28 46 41 M 36 x 2 L 28 18.5
XSV NW 32 HL VA 36.5 PN 160 35 55 50 M 45 x 2 L 35 18.5
XSV NW 40 HL VA 36.0 PN 160 42 65 60 M 52 x 2 L 42 19.0
XSV NW 03 HS VA 29.0 PN 630 6 19 19 M 14 x 1.5 S 6 12.0
XSV NW 04 HS VA 29.0 PN 630 8 22 22 M 16 x 1.5 S 8 13.0
XSV NW 06 HS VA 29.5 PN 630 10 24 24 M 18 x 1.5 S 10 14.5
XSV NW 08 HS VA 30.5 PN 630 12 27 27 M 20 x 1.5 S 12 14.5
XSV NW 10 HS VA 32.0 PN 630 14 30 30 M 22 x 1.5 S 14 17.0
XSV NW 13 HS VA 31.5 PN 400 16 32 32 M 24 x 1.5 S 16 16.5
XSV NW 16 HS VA 33.5 PN 400 20 41 41 M 30 x 2 S 20 17.5
XSV NW 20 HS VA 35.0 PN 400 25 46 46 M 36 x 2 S 25 20.0
XSV NW 25 HS VA 37.5 PN 400 30 50 50 M 42 x 2 S 30 21.5
XSV NW 32 HS VA 37.0 PN 315 38 65 65 M 52 x 2 S 38 22.0
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.