XSW

Bulkhead fitting, angle 90

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 + 2 metric cylindrical outer thread
Construction Angle 90°
Design Bulkhead fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 + 2 24° inner cone
Standard DIN 2353
ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name b mm L2 mm Operating pressure L5 mm L4 mm L1 mm L3 mm External pipe Ø mm S1 AF mm G1 Series Ø D mm Ø d2 mm
Product Name b mm L2 mm Operating pressure L5 mm L4 mm L1 mm L3 mm External pipe Ø mm S1 AF mm G1 Series Ø D mm Ø d2 mm
XSW NW 04 HL 16 27.0 PN 315 14 12.0 34 19 6 17 12 M 12 x 1,5 L 17 6
XSW NW 06 HL 16 27.0 PN 315 17 14.0 34 21 8 19 12 M 14 x 1.5 L 19 8
XSW NW 08 HL 16 28.0 PN 315 18 15.0 35 22 10 22 14 M 16 x 1.5 L 22 10
XSW NW 10 HL 16 29.0 PN 315 20 17.0 36 24 12 24 17 M 18 x 1.5 L 24 12
XSW NW 13 HL 16 31.0 PN 315 23 21.0 38 28 15 30 19 M 22 x 1.5 L 27 15
XSW NW 16 HL 16 32.5 PN 315 24 23.5 40 31 18 36 24 M 26 x 1.5 L 32 18
XSW NW 20 HL 16 34.5 PN 160 30 27.5 42 35 22 41 27 M 30 x 2 L 36 22
XSW NW 25 HL 16 35.5 PN 160 34 30.5 43 38 28 46 36 M 36 x 2 L 42 28
XSW NW 32 HL 16 36.5 PN 160 39 34.5 47 45 35 55 41 M 45 x 2 L 50 35
XSW NW 40 HL 16 36.0 PN 160 43 40.0 47 51 42 65 50 M 52 x 2 L 60 42
XSW NW 03 HS 16 29.0 PN 630 17 16.0 36 23 6 19 12 M 14 x 1.5 S 19 6
XSW NW 04 HS 16 29.0 PN 630 18 17.0 36 24 8 22 14 M 16 x 1.5 S 22 8
XSW NW 06 HS 16 29.5 PN 630 20 17.5 16 25 10 24 17 M 18 x 1.5 S 24 10
XSW NW 08 HS 16 30.5 PN 630 21 21.5 38 29 12 27 17 M 20 x 1.5 S 27 12
XSW NW 10 HS 16 32.0 PN 630 23 22.0 40 30 14 30 19 M 22 x 1.5 S 27 14
XSW NW 13 HS 16 31.5 PN 400 24 24.5 40 33 16 32 24 M 24 x 1.5 S 30 16
XSW NW 16 HS 16 33.5 PN 400 30 26.5 44 37 20 41 27 M 30 x 2 S 36 20
XSW NW 20 HS 16 35.0 PN 400 34 30.0 47 42 25 46 36 M 36 x 2 S 42 25
XSW NW 25 HS 16 37.5 PN 400 39 35.5 51 49 30 50 41 M 42 x 2 S 50 30
XSW NW 32 HS 16 37.0 PN 315 43 41.0 53 57 38 65 50 M 52 x 2 S 60 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.