XSWM

Banjo fitting, angle 90°



Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Design Banjo fitting
Construction Angle 90°
Sealing form 1 Edge sealing ring
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 2353, ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L1 mm L2 mm L4 mm L7 mm AF mm S1
Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L1 mm L2 mm L4 mm L7 mm AF mm S1
XSWM 04 LL LL PN 100 4 M 8 x 1 12,5 6 17,0 8 10,5 14,5 12 14
XSWM 05 LL LL PN 100 5 M 8 x 1 12,5 6 17,0 10 11,5 17,0 14 14
XSWM 06 LL LL PN 100 6 M 10 x 1 14,0 6 21,0 10 10,0 15,5 14 14
XSWM 08 LL LL PN 100 8 M 10 x 1 14,0 6 21,0 10 11,0 16,5 14 14
XSWM NW 04 HL 12 L PN 250 6 M 12 x 1.5 17,0 9 27,5 13 12,5 19,5 17 17
PN = Nominal pressure PB = Max. operating pressure - Series: LL = Very light L = Light S = Heavy - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.