XSWM VA

Banjo fitting, angle 90°



Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Design Banjo fitting
Construction Angle 90°
Sealing form 1 Edge sealing ring
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 2353, ISO 8434-1
Material Stainless steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L1 mm L2 mm L4 mm L7 mm AF mm S1
Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L1 mm L2 mm L4 mm L7 mm AF mm S1
XSWM NW 04 HL VA L PN 250 6 M 10 x 1 14,5 6 21,5 10,0 10,5 17,5 14 14
XSWM NW 06 HL VA L PN 250 8 M 12 x 1.5 17,5 9 25,0 12,0 12,0 19,0 17 17
XSWM NW 08 HL VA L PN 250 10 M 14 x 1.5 19,5 9 27,0 13,0 14,0 21,0 19 19
XSWM NW 10 HL VA L PN 250 12 M 16 x 1.5 21,5 9 32,0 15,0 15,5 22,5 22 22
XSWM NW 13 HL VA L PN 250 15 M 18 x 1.5 23,5 9 37,5 18,0 17,5 24,5 24 24
XSWM NW 16 HL VA L PN 160 18 M 22 x 1.5 27,0 11 44,0 21,5 20,5 28,0 30 27
XSWM NW 20 HL VA L PN 160 22 M 26 x 1.5 31,0 12 49,0 24,0 25,5 33,0 36 32
XSWM NW 03 HS VA S PN 250 6 M 12 x 1.5 17,5 9 25,0 12,0 14,0 21,0 17 17
XSWM NW 04 HS VA S PN 250 8 M 14 x 1.5 19,5 9 27,0 13,0 15,0 22,0 19 19
XSWM NW 06 HS VA S PN 250 10 M 16 x 1.5 21,5 9 32,0 15,0 16,0 23,5 22 22
XSWM NW 08 HS VA S PN 250 12 M 18 x 1.5 23,5 9 37,0 18,0 17,0 24,5 24 24
XSWM NW 10 HS VA S PN 250 14 M 20 x 1.5 25,5 11 37,0 18,0 20,0 28,0 27 27
XSWM NW 13 HS VA S PN 160 16 M 22 x 1.5 27,0 11 44,0 22,0 21,5 30,0 30 27
XSWM NW 16 HS VA S PN 160 20 M 27 x 2 32,0 13 49,0 24,0 24,5 35,0 36 32
PN = Nominal pressure PB = Max. operating pressure - Series: LL = Very light L = Light S = Heavy - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.