XSWR

Banjo fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Design Banjo fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Edge sealing ring
Sealing form 2 24° inner cone
Standard DIN 2353
ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm L7 mm i mm L1 mm S1 L4 mm G External pipe Ø mm Operating pressure AF mm Series Ø D mm Ø d2 mm
Product Name L2 mm L7 mm i mm L1 mm S1 L4 mm G External pipe Ø mm Operating pressure AF mm Series Ø D mm Ø d2 mm
XSWR 04 LL 10.0 15.5 6 21.0 Banjo fitting, angle 90°; Steel 14 11.5 G 1/8" -28 4 PN 100 14 LL 14.5 4
XSWR 05 LL 10.0 14.5 6 21.5 Banjo fitting, angle 90°; Steel 14 10.0 G 1/8" -28 5 PN 100 14 LL 14.5 5
XSWR 06 LL 10.0 14.5 6 21.5 Banjo fitting, angle 90°; Steel 14 10.0 G 1/8" -28 6 PN 100 14 LL 14.5 6
XSWR 08 LL 10.0 16.5 6 21.0 Banjo fitting, angle 90°; Steel 14 11.0 G 1/8" -28 8 PN 100 14 LL 14.5 8
XSWR NW 13 HL 3/8 18.0 26.0 9 37.5 Banjo fitting, angle 90°; Steel 22 19.0 G 3/8" -19 15 PN 250 27 L 22.5 15
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure
PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.