XSW VA

Bulkhead fitting, angle 90



Properties

Connection 1 + 2 metric cylindrical outer thread
Design Bulkhead fitting
Construction Angle 90°
Sealing form 1 + 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 3911
Material Stainless steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 Ø D mm b mm L1 mm L2 mm L3 mm L4 mm L5 mm AF mm S1
Product Name Series Operating pressure Ø d2 mm G1 Ø D mm b mm L1 mm L2 mm L3 mm L4 mm L5 mm AF mm S1
XSW NW 04 HL VA L PN 315 6 M 12 x 1.5 17 16 34 27,0 19 12,0 14 12 17
XSW NW 06 HL VA L PN 315 8 M 14 x 1.5 19 16 34 27,0 21 14,0 17 12 19
XSW NW 08 HL VA L PN 315 10 M 16 x 1.5 22 16 35 28,0 22 15,0 18 14 22
XSW NW 10 HL VA L PN 315 12 M 18 x 1.5 24 16 36 29,0 24 17,0 20 17 24
XSW NW 13 HL VA L PN 315 15 M 22 x 1.5 27 16 38 31,0 28 21,0 25 19 30
XSW NW 16 HL VA L PN 315 18 M 26 x 1.5 32 16 40 32,5 31 23,5 24 24 36
XSW NW 20 HL VA L PN 160 22 M 30 x 2 36 16 42 34,5 35 27,5 30 27 41
XSW NW 25 HL VA L PN 160 28 M 36 x 2 42 16 43 35,5 38 30,5 34 36 46
XSW NW 32 HL VA L PN 160 35 M 45 x 2 50 16 47 36,5 45 34,5 39 41 55
XSW NW 40 HL VA L PN 160 42 M 52 x 2 60 16 47 36,0 51 40,0 43 50 65
XSW NW 03 HS VA S PN 630 6 M 14 x 1.5 19 16 36 29,0 23 16,0 17 12 19
XSW NW 04 HS VA S PN 630 8 M 16 x 1.5 22 16 36 29,0 24 17,0 18 14 22
XSW NW 06 HS VA S PN 630 10 M 18 x 1.5 24 16 16 29,5 25 17,5 20 17 24
XSW NW 08 HS VA S PN 630 12 M 20 x 1.5 27 16 38 30,5 29 21,5 21 17 27
XSW NW 10 HS VA S PN 630 14 M 22 x 1.5 27 16 40 32,0 30 22,0 23 19 30
XSW NW 13 HS VA S PN 400 16 M 24 x 1.5 30 16 40 31,5 33 24,5 24 24 32
XSW NW 16 HS VA S PN 400 20 M 30 x 2 36 16 44 33,5 37 26,5 30 27 41
XSW NW 20 HS VA S PN 400 25 M 36 x 2 42 16 47 35,0 42 30,0 34 36 46
XSW NW 25 HS VA S PN 400 30 M 42 x 2 50 16 51 37,5 49 35,5 39 41 50
XSW NW 32 HS VA S PN 315 38 M 52 x 2 60 16 53 37,0 57 41,0 43 50 65
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.