XT

Fitting, T shaped



Properties

Connection 1 - 3 metric cylindrical outer thread
Design Fitting
Construction T shaped
Sealing form 1 - 3 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 2353, ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 - G3 L2 mm L7 mm AF mm
Product Name Series Operating pressure Ø d2 mm G1 - G3 L2 mm L7 mm AF mm
XT 04 LL LL PN 100 4 M 8 x 1 11,0 15 9
XT 05 LL LL PN 100 5 M 10 x 1 9,5 15 9
XT 06 LL LL PN 100 6 M 10 x 1 9,5 15 9
XT 08 LL LL PN 100 8 M 12 x 1 11,5 17 12
XT 10 LL LL PN 100 10 M 14 x 1 12,5 18 12
XT 12 LL LL PN 100 12 M 16 x 1 15,0 21 14
XT NW 04 HL L PN 315 6 M 12 x 1.5 12,0 19 12
XT NW 06 HL L PN 315 8 M 14 x 1.5 14,0 21 12
XT NW 08 HL L PN 315 10 M 16 x 1.5 15,0 22 14
XT NW 10 HL L PN 315 12 M 18 x 1.5 17,0 24 17
XT NW 13 HL L PN 315 15 M 22 x 1.5 21,0 28 19
XT NW 16 HL L PN 315 18 M 26 x 1.5 23,5 31 24
XT NW 20 HL L PN 160 22 M 30 x 2 27,5 35 27
XT NW 25 HL L PN 160 28 M 36 x 2 30,5 38 36
XT NW 32 HL L PN 160 35 M 45 x 2 34,5 45 41
XT NW 40 HL L PN 160 42 M 52 x 2 40,0 51 50
XT NW 03 HS S PN 630 6 M 14 x 1.5 16,0 23 12
XT NW 04 HS S PN 630 8 M 16 x 1.5 17,0 24 14
XT NW 06 HS S PN 630 10 M 18 x 1.5 17,5 25 17
XT NW 08 HS S PN 630 12 M 20 x 1.5 21,5 29 17
XT NW 10 HS S PN 630 14 M 22 x 1.5 22,0 30 19
XT NW 13 HS S PN 400 16 M 24 x 1.5 24,5 33 24
XT NW 16 HS S PN 400 20 M 30 x 2 26,5 37 27
XT NW 20 HS S PN 400 25 M 36 x 2 30,0 42 36
XT NW 25 HS S PN 400 30 M 42 x 2 35,5 49 41
XT NW 32 HS S PN 315 38 M 52 x 2 41,0 57 50
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.