XTR

Screw-in fitting, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 metric cylindrical outer thread
Construction T shaped
Design Screw-in fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Shape B
Sealing form 2 + 3 24° inner cone
Standard DIN 2353
ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm L7 mm i mm L1 mm External pipe Ø mm Operating pressure AF mm G1 Series Ø D mm Ø d2 mm
Product Name L2 mm L7 mm i mm L1 mm External pipe Ø mm Operating pressure AF mm G1 Series Ø D mm Ø d2 mm
XTR NW 20 HL 27.5 35 16 26 Screw-in fitting, T shaped; Steel 22 PN 160 27 G 3/4" -14 L 31.0 22
XTR NW 25 HL 30.5 38 18 30 Screw-in fitting, T shaped; Steel 28 PN 160 36 G 1" -11 L 39.0 28
XTR NW 32 HL 34.5 45 20 34 Screw-in fitting, T shaped; Steel 35 PN 160 41 G 1.1/4" -11 L 49.0 35
XTR NW 40 HL 40.0 51 22 39 Screw-in fitting, T shaped; Steel 42 PN 160 50 G 1.1/2" -11 L 55.0 42
XTR NW 16 HS 26.5 37 16 26 Screw-in fitting, T shaped; Steel 20 PN 400 27 G 3/4" -14 S 32.0 20
XTR NW 20 HS 30.0 42 18 30 Screw-in fitting, T shaped; Steel 25 PN 250 36 G 1" -11 S 39.0 25
XTR NW 25 HS 35.5 49 20 34 Screw-in fitting, T shaped; Steel 30 PN 160 41 G 1.1/4" -11 S 49.0 30
XTR NW 32 HS 41.0 57 22 39 Screw-in fitting, T shaped; Steel 38 PN 160 50 G 1.1/2" -11 S 55.0 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure
Ø d2 = External pipe diameter
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.