XTRK

Screw-in fitting, T shaped



Properties

Connection 1 BSPT conical external threads
Connection 2 + 3 metric cylindrical outer thread
Design Screw-in fitting
Construction T shaped
Sealing form 1 thread seal
Sealing form 2 + 3 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 2353, ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G i mm L4 mm L5 mm L7 mm AF mm
Product Name Series Operating pressure Ø d2 mm G i mm L4 mm L5 mm L7 mm AF mm
XTR 04 LL LL PN 100 4 R 1/8" K 8 11,0 17 15 9
XTR 05 LL LL PN 100 5 R 1/8" K 8 9,5 17 15 9
XTR 06 LL LL PN 100 6 R 1/8" K 8 9,5 17 15 9
XTR 08 LL LL PN 100 8 R 1/8" K 8 11,5 20 17 12
XTR 10 LL LL PN 100 10 R 1/4" K 12 12,5 23 16 14
XTR 12 LL LL PN 100 12 R 1/4" K 12 13,0 23 17 17
XTR NW 04 HL L PN 315 6 R 1/8" K 8 12,0 20 19 12
XTR NW 06 HL L PN 315 8 R 1/4" K 12 14,0 26 21 12
XTR NW 08 HL L PN 315 10 R 1/4" K 12 15,0 27 22 14
XTR NW 10 HL L PN 315 12 R 3/8" K 12 17,0 28 24 17
XTR NW 13 HL L PN 315 15 R 1/2" K 14 21,0 34 28 19
XTR NW 16 HL L PN 315 18 R 1/2" K 14 23,5 34 31 24
XTR NW 03 HS S PN 400 6 R 1/4" K 12 16,0 26 23 12
XTR NW 04 HS S PN 400 8 R 1/4" K 12 17,0 26 24 14
XTR NW 06 HS S PN 400 10 R 3/8" K 12 17,5 27 25 17
XTR NW 08 HS S PN 400 12 R 3/8" K 12 21,5 28 29 19
XTR NW 10 HS S PN 400 14 R 1/2" K 14 22,0 32 30 19
XTR NW 13 HS S PN 400 16 R 1/2" K 14 24,5 32 33 24
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.