XTR VA

Screw-in fitting, T shaped



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 metric cylindrical outer thread
Design Screw-in fitting
Construction T shaped
Sealing form 1 Shape B
Sealing form 2 + 3 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 3907
Material Stainless steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 Ø D mm i mm L1 mm L2 mm L7 mm AF mm
Product Name Series Operating pressure Ø d2 mm G1 Ø D mm i mm L1 mm L2 mm L7 mm AF mm
XTR NW 20 HL VA L PN 160 22 G 3/4" -14 31,0 16 26 27,5 35 27
XTR NW 25 HL VA L PN 160 28 G 1" -11 39,0 18 30 30,5 38 36
XTR NW 32 HL VA L PN 160 35 G 1.1/4" -11 49,0 20 34 34,5 45 41
XTR NW 40 HL VA L PN 160 42 G 1.1/2" -11 55,0 22 39 40,0 51 50
XTR NW 16 HS VA S PN 400 20 G 3/4" -14 32,0 16 26 26,5 37 27
XTR NW 20 HS VA S PN 250 25 G 1" -11 39,0 18 30 30,0 42 36
XTR NW 25 HS VA S PN 160 30 G 1.1/4" -11 49,0 20 34 35,5 49 41
XTR NW 32 HS VA S PN 160 38 G 1.1/2" -11 55,0 22 39 41,0 57 50
PN = Nominal pressure PB = Max. operating pressure - Series: LL = Very light L = Light S = Heavy - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.