XT VA

Fitting, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 - 3 metric cylindrical outer thread
Construction T shaped
Design Fitting
Lieferumfang Socket (without union nut and cutting ring)
Material Stainless steel
Sealing form 1 - 3 24° inner cone
Standard DIN 2353, ISO 8434-1

Hints

Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen.

Article Table

Product Name L7 mm L2 mm Betriebsdruck G1 - G3 Rohr-Außen Ø mm SW mm Baureihe Ø d2 mm
Product Name L7 mm L2 mm Betriebsdruck G1 - G3 Rohr-Außen Ø mm SW mm Baureihe Ø d2 mm
XT04LLVA 15 mm 11.0 mm PN 100 M 8 x 1 4 mm 9 mm LL 4 mm
XT06LLVA 15 mm 9.5 mm PN 100 M 10 x 1 6 mm 9 mm LL 6 mm
XT08LLVA 17 mm 11.5 mm PN 100 M 12 x 1 8 mm 12 mm LL 8 mm
XTNW04HLVA 19 mm 12.0 mm PN 315 M 12 x 1,5 6 mm 12 mm L 6 mm
XTNW06HLVA 21 mm 14.0 mm PN 315 M 14 x 1.5 8 mm 12 mm L 8 mm
XTNW08HLVA 22 mm 15.0 mm PN 315 M 16 x 1.5 10 mm 14 mm L 10 mm
XTNW10HLVA 24 mm 17.0 mm PN 315 M 18 x 1.5 12 mm 17 mm L 12 mm
XTNW13HLVA 28 mm 21.0 mm PN 315 M 22 x 1.5 15 mm 19 mm L 15 mm
XTNW16HLVA 31 mm 23.5 mm PN 315 M 26 x 1.5 18 mm 24 mm L 18 mm
XTNW20HLVA 35 mm 27.5 mm PN 160 M 30 x 2 22 mm 27 mm L 22 mm
XTNW25HLVA 38 mm 30.5 mm PN 160 M 36 x 2 28 mm 36 mm L 28 mm
XTNW32HLVA 45 mm 34.5 mm PN 160 M 45 x 2 35 mm 41 mm L 35 mm
XTNW40HLVA 51 mm 40.0 mm PN 160 M 52 x 2 42 mm 50 mm L 42 mm
XTNW03HSVA 23 mm 16.0 mm PN 630 M 14 x 1.5 6 mm 12 mm S 6 mm
XTNW04HSVA 24 mm 17.0 mm PN 630 M 16 x 1.5 8 mm 14 mm S 8 mm
XTNW06HSVA 25 mm 17.5 mm PN 630 M 18 x 1.5 10 mm 17 mm S 10 mm
XTNW08HSVA 29 mm 21.5 mm PN 630 M 20 x 1.5 12 mm 17 mm S 12 mm
XTNW10HSVA 30 mm 22.0 mm PN 630 M 22 x 1.5 14 mm 19 mm S 14 mm
XTNW13HSVA 33 mm 24.5 mm PN 400 M 24 x 1.5 16 mm 24 mm S 16 mm
XTNW16HSVA 37 mm 26.5 mm PN 400 M 30 x 2 20 mm 27 mm S 20 mm
XTNW20HSVA 42 mm 30.0 mm PN 400 M 36 x 2 25 mm 36 mm S 25 mm
XTNW25HSVA 49 mm 35.5 mm PN 400 M 42 x 2 30 mm 41 mm S 30 mm
XTNW32HSVA 57 mm 41.0 mm PN 315 M 52 x 2 38 mm 50 mm S 38 mm
Series: LL = Very light L = Light S = Heavy, PN = Nominal pressure PB = Max. operating pressure, Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.