XVEL

Fitting, L shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Connection 2 + 3 metric cylindrical outer thread
Construction L shaped
Design Adjustable direction fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
pre-assembled
Sealing form 1 Pipe socket, pre-assembled
Sealing form 2 + 3 24° inner cone
Standard DIN 2353
ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm L7 mm S1 External pipe Ø mm Operating pressure AF mm G1 L5 mm Series Ø d2 mm
Product Name L2 mm L7 mm S1 External pipe Ø mm Operating pressure AF mm G1 L5 mm Series Ø d2 mm
XVEL NW 04 HL 12.0 19 Fitting, L shaped; Steel 14 6 PN 315 12 M 12 x 1,5 26.0 L 6
XVEL NW 06 HL 14.0 21 Fitting, L shaped; Steel 17 8 PN 315 12 M 14 x 1.5 27.5 L 8
XVEL NW 08 HL 15.0 22 Fitting, L shaped; Steel 19 10 PN 315 14 M 16 x 1.5 29.0 L 10
XVEL NW 10 HL 17.0 24 Fitting, L shaped; Steel 22 12 PN 315 17 M 18 x 1.5 29.5 L 12
XVEL NW 13 HL 21.0 28 Fitting, L shaped; Steel 27 15 PN 315 19 M 22 x 1.5 32.5 L 15
XVEL NW 16 HL 23.5 31 Fitting, L shaped; Steel 32 18 PN 315 24 M 26 x 1.5 35.5 L 18
XVEL NW 20 HL 27.5 35 Fitting, L shaped; Steel 36 22 PN 160 27 M 30 x 2 38.5 L 22
XVEL NW 25 HL 30.5 38 Fitting, L shaped; Steel 41 28 PN 160 36 M 36 x 2 41.5 L 28
XVEL NW 32 HL 34.5 45 Fitting, L shaped; Steel 50 35 PN 160 41 M 45 x 2 51.0 L 35
XVEL NW 40 HL 40.0 51 Fitting, L shaped; Steel 60 42 PN 160 50 M 52 x 2 56.0 L 42
XVEL NW 03 HS 16.0 23 Fitting, L shaped; Steel 17 6 PN 630 12 M 14 x 1.5 27.0 S 6
XVEL NW 04 HS 17.0 24 Fitting, L shaped; Steel 19 8 PN 630 14 M 16 x 1.5 27.5 S 8
XVEL NW 06 HS 17.5 25 Fitting, L shaped; Steel 22 10 PN 630 17 M 18 x 1.5 30.0 S 10
XVEL NW 08 HS 21.5 29 Fitting, L shaped; Steel 24 12 PN 630 17 M 20 x 1.5 31.0 S 12
XVEL NW 10 HS 22.0 30 Fitting, L shaped; Steel 27 14 PN 630 19 M 22 x 1.5 35.0 S 14
XVEL NW 13 HS 24.5 33 Fitting, L shaped; Steel 30 16 PN 400 24 M 24 x 1.5 36.5 S 16
XVEL NW 16 HS 26.5 37 Fitting, L shaped; Steel 36 20 PN 400 27 M 30 x 2 44.5 S 20
XVEL NW 20 HS 30.0 42 Fitting, L shaped; Steel 46 25 PN 400 36 M 36 x 2 50.0 S 25
XVEL NW 25 HS 35.5 49 Fitting, L shaped; Steel 50 30 PN 400 41 M 42 x 2 55.0 S 30
XVEL NW 32 HS 41.0 57 Fitting, L shaped; Steel 60 38 PN 315 50 M 52 x 2 63.0 S 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure
Ø d2 = External pipe diameter
SW, S1, S2, S3 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.