XVELO

Fitting, L shaped



Properties

Connection 1 metric nut thread
Connection 2 + 3 metric cylindrical outer thread
Design Adjustable direction fitting
Construction L shaped
Sealing form 1 24° outer cone with O-ring
Sealing form 2 + 3 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard ISO 8434-4
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 L1 mm L2 mm L7 mm AF mm S1 OR
Product Name Series Operating pressure Ø d2 mm G1 L1 mm L2 mm L7 mm AF mm S1 OR
XVELO NW 04 HL L PN 315 6 M 12 x 1.5 26,0 12,0 19 12 14 4.0 x 1.5
XVELO NW 06 HL L PN 315 8 M 14 x 1.5 26,5 14,0 21 12 17 6.0 x 1.5
XVELO NW 08 HL L PN 315 10 M 16 x 1.5 29,0 15,0 22 14 19 7.5 x 1.5
XVELO NW 10 HL L PN 315 12 M 18 x 1.5 29,5 17,0 24 17 22 9.0 x 1.5
XVELO NW 13 HL L PN 315 15 M 22 x 1.5 33,0 21,0 28 19 27 12.0 x 2.0
XVELO NW 16 HL L PN 315 18 M 26 x 1.5 35,5 23,5 31 24 32 15.0 x 2.0
XVELO NW 20 HL L PN 160 22 M 30 x 2 38,5 27,5 35 27 36 20.0 x 2.0
XVELO NW 25 HL L PN 160 28 M 36 x 2 43,0 30,5 38 36 41 26.0 x 2.0
XVELO NW 32 HL L PN 160 35 M 45 x 2 51,5 34,5 45 41 50 32.0 x 2.5
XVELO NW 40 HL L PN 160 42 M 52 x 2 56,0 40,0 51 50 60 38.0 x 2.5
XVELO NW 03 HS S PN 630 6 M 14 x 1.5 27,0 16,0 23 12 17 4.0 x 1.5
XVELO NW 04 HS S PN 630 8 M 16 x 1.5 27,5 17,0 24 14 19 6.0 x 1.5
XVELO NW 06 HS S PN 630 10 M 18 x 1.5 30,5 17,5 25 17 22 7.5 x 1.5
XVELO NW 08 HS S PN 630 12 M 20 x 1.5 31,0 21,5 29 17 24 9.0 x 1.5
XVELO NW 10 HS S PN 630 14 M 22 x 1.5 35,0 22,0 30 19 27 10.0 x 2.0
XVELO NW 13 HS S PN 400 16 M 24 x 1.5 37,5 24,5 33 24 30 12.0 x 2.0
XVELO NW 16 HS S PN 400 20 M 30 x 2 44,5 26,5 37 27 36 16.3 x 2.4
XVELO NW 20 HS S PN 400 25 M 36 x 2 50,5 30,0 42 36 46 -
XVELO NW 25 HS S PN 400 30 M 42 x 2 55,0 35,5 49 41 50 25.3 x 2.4
XVELO NW 32 HS S PN 315 38 M 52 x 2 62,4 41,0 57 50 60 33.3 x 2.4
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.