XVEL VA

Fitting, L shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Connection 2 + 3 metric cylindrical outer thread
Construction L shaped
Design Adjustable direction fitting
Material Stainless steel
Scope of supply Socket (without union nut and cutting ring)
pre-assembled
Sealing form 1 Pipe socket, pre-assembled
Sealing form 2 + 3 24° inner cone
Standard DIN 3954

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L7 mm L2 mm Operating pressure External pipe Ø mm S1 AF mm G1 Series L5 mm Ø d2 mm
Product Name L7 mm L2 mm Operating pressure External pipe Ø mm S1 AF mm G1 Series L5 mm Ø d2 mm
XVEL NW 04 HL VA 19 12.0 PN 315 6 14 12 M 12 x 1,5 L 26.0 6
XVEL NW 06 HL VA 21 14.0 PN 315 8 17 12 M 14 x 1.5 L 27.5 8
XVEL NW 08 HL VA 22 15.0 PN 315 10 19 14 M 16 x 1.5 L 29.0 10
XVEL NW 10 HL VA 24 17.0 PN 315 12 22 17 M 18 x 1.5 L 29.5 12
XVEL NW 13 HL VA 28 21.0 PN 315 15 27 19 M 22 x 1.5 L 32.5 15
XVEL NW 16 HL VA 31 23.5 PN 315 18 32 24 M 26 x 1.5 L 35.5 18
XVEL NW 20 HL VA 35 27.5 PN 160 22 36 27 M 30 x 2 L 38.5 22
XVEL NW 25 HL VA 38 30.5 PN 160 28 41 36 M 36 x 2 L 41.5 28
XVEL NW 32 HL VA 45 34.5 PN 160 35 50 41 M 45 x 2 L 51.0 35
XVEL NW 40 HL VA 51 40.0 PN 160 42 60 50 M 52 x 2 L 56.0 42
XVEL NW 03 HS VA 23 16.0 PN 630 6 17 12 M 14 x 1.5 S 27.0 6
XVEL NW 04 HS VA 24 17.0 PN 630 8 19 14 M 16 x 1.5 S 27.5 8
XVEL NW 06 HS VA 25 17.5 PN 630 10 22 17 M 18 x 1.5 S 30.0 10
XVEL NW 08 HS VA 29 21.5 PN 630 12 24 17 M 20 x 1.5 S 31.0 12
XVEL NW 10 HS VA 30 22.0 PN 630 14 27 19 M 22 x 1.5 S 35.0 14
XVEL NW 13 HS VA 33 24.5 PN 400 16 30 24 M 24 x 1.5 S 36.5 16
XVEL NW 16 HS VA 37 26.5 PN 400 20 36 27 M 30 x 2 S 44.5 20
XVEL NW 20 HS VA 42 30.0 PN 400 25 46 36 M 36 x 2 S 50.0 25
XVEL NW 25 HS VA 49 35.5 PN 400 30 50 41 M 42 x 2 S 55.0 30
XVEL NW 32 HS VA 57 41.0 PN 315 38 60 50 M 52 x 2 S 63.0 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.