XVET

Fitting, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Connection 2 + 3 metric cylindrical outer thread
Construction T shaped
Design Adjustable direction fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
pre-assembled
Sealing form 1 Pipe socket with cutting ring
Sealing form 2 + 3 24° inner cone
Standard DIN 2353
ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L7 mm L2 mm Operating pressure External pipe Ø mm S1 AF mm G1 Series L5 mm Ø d2 mm
Product Name L7 mm L2 mm Operating pressure External pipe Ø mm S1 AF mm G1 Series L5 mm Ø d2 mm
XVET NW 04 HL 19 12.0 PN 315 6 14 12 M 12 x 1,5 L 26.0 6
XVET NW 06 HL 21 14.0 PN 315 8 17 12 M 14 x 1.5 L 27.5 8
XVET NW 08 HL 22 15.0 PN 315 10 19 14 M 16 x 1.5 L 29.0 10
XVET NW 10 HL 24 17.0 PN 315 12 22 17 M 18 x 1.5 L 29.5 12
XVET NW 13 HL 28 21.0 PN 315 15 27 19 M 22 x 1.5 L 32.5 15
XVET NW 16 HL 31 23.5 PN 315 18 32 24 M 26 x 1.5 L 35.5 18
XVET NW 20 HL 35 27.5 PN 160 22 36 27 M 30 x 2 L 38.5 22
XVET NW 25 HL 38 30.5 PN 160 28 41 36 M 36 x 2 L 41.5 28
XVET NW 32 HL 45 34.5 PN 160 35 50 41 M 45 x 2 L 51.0 35
XVET NW 40 HL 51 40.0 PN 160 42 60 50 M 52 x 2 L 56.0 42
XVET NW 03 HS 23 16.0 PN 630 6 17 12 M 14 x 1.5 S 27.0 6
XVET NW 04 HS 24 17.0 PN 630 8 19 14 M 16 x 1.5 S 27.5 8
XVET NW 06 HS 25 17.5 PN 630 10 22 17 M 18 x 1.5 S 30.0 10
XVET NW 08 HS 29 21.5 PN 630 12 24 17 M 20 x 1.5 S 31.0 12
XVET NW 10 HS 30 22.0 PN 630 14 27 19 M 22 x 1.5 S 35.0 14
XVET NW 13 HS 33 24.5 PN 400 16 30 24 M 24 x 1.5 S 36.5 16
XVET NW 16 HS 37 26.5 PN 400 20 36 27 M 30 x 2 S 44.5 20
XVET NW 20 HS 42 30.0 PN 400 25 46 36 M 36 x 2 S 50.0 25
XVET NW 25 HS 49 35.5 PN 400 30 50 41 M 42 x 2 S 55.0 30
XVET NW 32 HS 57 41.0 PN 315 38 60 50 M 52 x 2 S 63.0 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.