XVETO

Fitting, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Connection 2 + 3 metric cylindrical outer thread
Construction T shaped
Design Adjustable direction fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 24° outer cone with O-ring
Sealing form 2 + 3 24° inner cone
Standard ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L7 mm L1 mm L2 mm Operating pressure External pipe Ø mm S1 AF mm Series Ø d2 mm OR
Product Name L7 mm L1 mm L2 mm Operating pressure External pipe Ø mm S1 AF mm Series Ø d2 mm OR
XVETO NW 04 HL 19 26.0 12.0 PN 315 6 14 12 L 6 4.0 x 1.5
XVETO NW 06 HL 21 26.5 14.0 PN 315 8 17 12 L 8 6.0 x 1.5
XVETO NW 08 HL 22 29.0 15.0 PN 315 10 19 14 L 10 7.5 x 1.5
XVETO NW 10 HL 24 29.5 17.0 PN 315 12 22 17 L 12 9.0 x 1.5
XVETO NW 13 HL 28 33.0 21.0 PN 315 15 27 19 L 15 12.0 x 2.0
XVETO NW 16 HL 31 35.5 23.5 PN 315 18 32 24 L 18 15.0 x 2.0
XVETO NW 20 HL 35 39.5 27.5 PN 160 22 36 27 L 22 20.0 x 2.0
XVETO NW 25 HL 38 43.0 30.5 PN 160 28 41 36 L 28 26.0 x 2.0
XVETO NW 32 HL 45 51.0 34.5 PN 160 35 50 41 L 35 32.0 x 2.5
XVETO NW 40 HL 51 56.0 40.0 PN 160 42 60 50 L 42 38.0 x 2.5
XVETO NW 03 HS 23 27.0 16.0 PN 630 6 17 12 S 6 4.0 x 1.5
XVETO NW 04 HS 24 27.5 17.0 PN 630 8 19 14 S 8 6.0 x 1.5
XVETO NW 06 HS 25 30.0 17.5 PN 630 10 22 17 S 10 7.5 x 1.5
XVETO NW 08 HS 29 31.5 21.5 PN 630 12 24 17 S 12 9.0 x 1.5
XVETO NW 10 HS 30 35.0 22.0 PN 630 14 27 19 S 14 10.0 x 2.0
XVETO NW 13 HS 33 37.5 24.5 PN 400 16 30 24 S 16 12.0 x 2.0
XVETO NW 16 HS 37 45.0 26.5 PN 400 20 36 27 S 20 16.3 x 2.4
XVETO NW 20 HS 42 50.5 30.0 PN 400 25 46 36 S 25 20,0 x 2,4
XVETO NW 25 HS 49 55.0 35.5 PN 400 30 50 41 S 30 25.3 x 2.4
XVETO NW 32 HS 57 63.0 41.0 PN 315 38 60 50 S 38 33.3 x 2.4
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.