XVET VA

Fitting, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Connection 2 + 3 metric cylindrical outer thread
Construction T shaped
Design Adjustable direction fitting
Material Stainless steel
Scope of supply Socket (without union nut and cutting ring)
pre-assembled
Sealing form 1 Pipe socket with cutting ring
Sealing form 2 + 3 24° inner cone
Standard DIN 2353
ISO 8434-1

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm L2 mm Operating pressure External pipe Ø mm S1 L3 mm AF mm G1 Series Ø d2 mm
Product Name L1 mm L2 mm Operating pressure External pipe Ø mm S1 L3 mm AF mm G1 Series Ø d2 mm
XVET NW 04 HL VA 27.0 12.0 PN 315 6 14 27.0 12 M 12 x 1,5 L 6
XVET NW 06 HL VA 29.0 14.0 PN 315 8 17 27.0 12 M 14 x 1.5 L 8
XVET NW 08 HL VA 30.0 15.0 PN 315 10 19 28.5 14 M 16 x 1.5 L 10
XVET NW 10 HL VA 32.0 17.0 PN 315 12 22 29.0 17 M 18 x 1.5 L 12
XVET NW 13 HL VA 36.0 21.0 PN 315 15 27 32.0 19 M 22 x 1.5 L 15
XVET NW 16 HL VA 40.0 23.5 PN 315 18 32 35.0 24 M 26 x 1.5 L 18
XVET NW 20 HL VA 44.0 27.5 PN 160 22 36 38.0 27 M 30 x 2 L 22
XVET NW 25 HL VA 47.0 30.5 PN 160 28 41 41.5 36 M 36 x 2 L 28
XVET NW 32 HL VA 56.0 34.5 PN 160 35 50 51.0 41 M 45 x 2 L 35
XVET NW 40 HL VA 63.0 40.0 PN 160 42 60 56.0 50 M 52 x 2 L 42
XVET NW 03 HS VA 31.0 16.0 PN 630 6 17 27.0 12 M 14 x 1.5 S 6
XVET NW 04 HS VA 32.0 17.0 PN 630 8 19 27.0 14 M 16 x 1.5 S 8
XVET NW 06 HS VA 34.0 17.5 PN 630 10 22 29.5 17 M 18 x 1.5 S 10
XVET NW 08 HS VA 38.0 21.5 PN 630 12 24 30.5 17 M 20 x 1.5 S 12
XVET NW 10 HS VA 40.0 22.0 PN 630 14 27 34.5 19 M 22 x 1.5 S 14
XVET NW 13 HS VA 43.0 24.5 PN 400 16 30 36.0 24 M 24 x 1.5 S 16
XVET NW 16 HS VA 48.0 26.5 PN 400 20 36 44.0 27 M 30 x 2 S 20
XVET NW 20 HS VA 54.0 30.0 PN 400 25 46 49.5 36 M 36 x 2 S 25
XVET NW 25 HS VA 62.0 36.5 PN 400 30 50 55.0 41 M 42 x 2 S 30
XVET NW 32 HS VA 72.0 41.0 PN 315 38 60 63.0 50 M 52 x 2 S 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.