XVHLL / XVHL / XVHS

Blanking socket



Properties

Connection 1 metric cylindrical outer thread
Design Blanking socket
Construction straight
Sealing form 1 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 2353, ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 L1 mm L2 mm L3 mm AF mm
Product Name Series Operating pressure Ø d2 mm G1 L1 mm L2 mm L3 mm AF mm
XVHLL 04 LL PN 100 4 M 8 x 1 12 8,0 4,0 9
XVHLL 05 LL PN 100 5 M 10 x 1 12 8,0 5,5 11
XVHLL 06 LL PN 100 6 M 10 x 1 12 8,0 5,5 11
XVHLL 08 LL PN 100 8 M 12 x 1 14 9,0 5,5 12
XVHL NW 04 L PN 315 6 M 12 x 1.5 14 10,0 7,0 12
XVHL NW 06 L PN 315 8 M 14 x 1.5 15 10,0 7,0 14
XVHL NW 08 L PN 315 10 M 16 x 1.5 16 11,0 7,0 17
XVHL NW 10 L PN 315 12 M 18 x 1.5 17 11,0 7,0 19
XVHL NW 13 L PN 315 15 M 22 x 1.5 18 12,0 7,0 24
XVHL NW 16 L PN 315 18 M 26 x 1.5 19 12,0 7,5 27
XVHL NW 20 L PN 160 22 M 30 x 2 21 14,0 7,5 32
XVHL NW 25 L PN 160 28 M 36 x 2 22 14,0 7,5 41
XVHL NW 32 L PN 160 35 M 45 x 2 25 16,0 10,5 46
XVHL NW 40 L PN 160 42 M 52 x 2 27 16,0 11,0 55
XVHS NW 03 S PN 630 6 M 14 x 1.5 18 12,0 7,0 14
XVHS NW 04 S PN 630 8 M 16 x 1.5 20 12,0 7,0 17
XVHS NW 06 S PN 630 10 M 18 x 1.5 20 12,0 7,5 19
XVHS NW 08 S PN 630 12 M 20 x 1.5 22 12,0 7,5 22
XVHS NW 10 S PN 630 14 M 22 x 1.5 24 14,0 8,0 24
XVHS NW 13 S PN 400 16 M 24 x 1.5 24 14,0 8,5 27
XVHS NW 16 S PN 400 20 M 30 x 2 28 16,0 10,5 32
XVHS NW 20 S PN 400 25 M 36 x 2 32 18,0 12,0 41
XVHS NW 25 S PN 400 30 M 42 x 2 36 20,0 13,5 46
XVHS NW 32 S PN 315 38 M 52 x 2 39 22,0 16,0 55
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.