XW

Fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 + 2 metric cylindrical outer thread
Construction Angle 90°
Design Fitting
Lieferumfang Socket (without union nut and cutting ring)
Material Steel
Sealing form 1 + 2 24° inner cone
Standard DIN 2353, ISO 8434-1
Surface electro galvanised

Hints

Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen.

Article Table

Product Name L7 mm L2 mm Betriebsdruck Rohr-Außen Ø mm SW mm Baureihe
Product Name L7 mm L2 mm Betriebsdruck Rohr-Außen Ø mm SW mm Baureihe
XW04LL 15 mm 11.0 mm PN 100 4 mm 9 mm LL
XW05LL 15 mm 9.5 mm PN 100 5 mm 9 mm LL
XW06LL 15 mm 9.5 mm PN 100 6 mm 9 mm LL
XW08LL 17 mm 11.5 mm PN 100 8 mm 12 mm LL
XW10LL 18 mm 12.5 mm PN 100 10 mm 14 mm LL
XW12LL 19 mm 13.0 mm PN 100 12 mm 17 mm LL
XWNW04HL 19 mm 12.0 mm PN 315 6 mm 12 mm L
XWNW06HL 21 mm 14.0 mm PN 315 8 mm 12 mm L
XWNW08HL 22 mm 15.0 mm PN 315 10 mm 14 mm L
XWNW10HL 24 mm 17.0 mm PN 315 12 mm 17 mm L
XWNW13HL 28 mm 21.0 mm PN 315 15 mm 19 mm L
XWNW16HL 31 mm 23.5 mm PN 315 18 mm 24 mm L
XWNW20HL 35 mm 27.5 mm PN 160 22 mm 27 mm L
XWNW25HL 38 mm 30.5 mm PN 160 28 mm 36 mm L
XWNW32HL 45 mm 34.5 mm PN 160 35 mm 41 mm L
XWNW40HL 51 mm 40.0 mm PN 160 42 mm 50 mm L
XWNW03HS 23 mm 16.0 mm PN 630 6 mm 12 mm S
XWNW04HS 24 mm 17.0 mm PN 630 8 mm 14 mm S
XWNW06HS 25 mm 17.5 mm PN 630 10 mm 17 mm S
XWNW08HS 29 mm 21.5 mm PN 630 12 mm 17 mm S
XWNW10HS 30 mm 22.0 mm PN 630 14 mm 19 mm S
XWNW13HS 33 mm 24.5 mm PN 400 16 mm 24 mm S
XWNW16HS 37 mm 26.5 mm PN 400 20 mm 27 mm S
XWNW20HS 42 mm 30.0 mm PN 400 25 mm 36 mm S
XWNW25HS 49 mm 35.5 mm PN 400 30 mm 41 mm S
XWNW32HS 57 mm 41.0 mm PN 315 38 mm 50 mm S
Series: LL = Very light L = Light S = Heavy, PN = Nominal pressure PB = Max. operating pressure, Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.