XWM VA

Screw-in fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Design Screw-in fitting
Lieferumfang Socket (without union nut and cutting ring)
Material Stainless steel
Online-Shop https://shop.hansa-flex.com/de/XWMVA
Sealing form 1 Shape B
Sealing form 2 24° inner cone
Standard DIN 2353, ISO 8434-1

Hints

Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen.

Article Table

Product Name L7 mm Betriebsdruck L5 mm L4 mm i mm D mm G Rohr-Außen Ø mm SW mm Baureihe Ø d2 mm
Product Name L7 mm Betriebsdruck L5 mm L4 mm i mm D mm G Rohr-Außen Ø mm SW mm Baureihe Ø d2 mm
XWMNW20HLVA 35 mm PN 160 26 mm 27.5 mm 16 mm 31 mm M 26 x 1.5 22 mm 27 mm L 22 mm
XWMNW25HLVA 38 mm PN 160 30 mm 30.5 mm 18 mm 39 mm M 33 x 2 28 mm 36 mm L 28 mm
XWMNW32HLVA 45 mm PN 160 34 mm 34.5 mm 20 mm 49 mm M 42 x 2 35 mm 41 mm L 35 mm
XWMNW40HLVA 51 mm PN 160 39 mm 40.0 mm 22 mm 55 mm M 48 x 2 42 mm 50 mm L 42 mm
XWMNW16HSVA 37 mm PN 400 26 mm 26.5 mm 16 mm 32 mm M 27 x 2 20 mm 27 mm S 20 mm
XWMNW20HSVA 42 mm PN 250 30 mm 30.0 mm 18 mm 39 mm M 33 x 2 25 mm 36 mm S 25 mm
XWMNW25HSVA 49 mm PN 160 34 mm 35.5 mm 20 mm 49 mm M 42 x 2 30 mm 41 mm S 30 mm
XWMNW32HSVA 57 mm PN 160 39 mm 41.0 mm 22 mm 55 mm M 48 x 2 38 mm 50 mm S 38 mm
Series: LL = Very light L = Light S = Heavy, PN = Nominal pressure PB = Max. operating pressure, Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.