XWN

Screw-in fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT external threads
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Design Screw-in fitting
Lieferumfang Socket (without union nut and cutting ring)
Material Steel
Sealing form 1 thread seal
Sealing form 2 24° inner cone
Standard DIN 2353, ISO 8434-1
Surface electro galvanised

Hints

Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen.

Article Table

Product Name i mm L7 mm Betriebsdruck G Rohr-Außen Ø mm SW mm L5 mm Baureihe L4 mm
Product Name i mm L7 mm Betriebsdruck G Rohr-Außen Ø mm SW mm L5 mm Baureihe L4 mm
XWN04LL 8.0 mm 15.0 mm PN 100 1/8" -27 NPT 4 mm 9 mm 17 mm LL 11.0 mm
XWN05LL 8.0 mm 15.0 mm PN 100 1/8" -27 NPT 5 mm 9 mm 17 mm LL 11.0 mm
XWN06LL 8.0 mm 15.0 mm PN 100 1/8" -27 NPT 6 mm 9 mm 17 mm LL 9.5 mm
XWN08LL 10.0 mm 17.0 mm PN 100 1/8" -27 NPT 8 mm 12 mm 20 mm LL 11.5 mm
XWNNW04HL 10.0 mm 19.0 mm PN 315 1/8" -27 NPT 6 mm 12 mm 20 mm L 12.0 mm
XWNNW04HL1/4 12.0 mm 21.0 mm PN 315 1/4" -18 NPT 6 mm 12 mm 26 mm L 14.0 mm
XWNNW04HL1/2 17.0 mm 30.0 mm PN 315 1/2" -14 NPT 6 mm 19 mm 34 mm L 23.0 mm
XWNNW06HL 12.0 mm 21.0 mm PN 315 1/4" -18 NPT 8 mm 12 mm 26 mm L 14.0 mm
XWNNW06HL3/8 15.2 mm 18.5 mm PN 315 3/8" -18 NPT 8 mm 12 mm 20 mm L 11.5 mm
XWNNW06HL1/2 17.5 mm 22.0 mm PN 315 1/2" -14 NPT 8 mm 12 mm 26 mm L 15.0 mm
XWNNW08HL 14.0 mm 22.0 mm PN 315 1/4" -18 NPT 10 mm 14 mm 27 mm L 15.0 mm
XWNNW08HL3/8 15.2 mm 22.0 mm PN 315 3/8" -18 NPT 10 mm 14 mm 27 mm L 15.0 mm
XWNNW10HL 12.5 mm 24.0 mm PN 315 3/8" -18 NPT 12 mm 17 mm 28 mm L 17.0 mm
XWNNW10HL1/4 14.0 mm 24.0 mm PN 315 1/4" -18 NPT 12 mm 17 mm 28 mm L 17.0 mm
XWNNW10HL1/2 19.0 mm 30.0 mm PN 315 1/2" -14 NPT 12 mm 19 mm 34 mm L 23.0 mm
XWNNW13HL 18.5 mm 28.0 mm PN 315 1/2" -14 NPT 15 mm 19 mm 34 mm L 21.0 mm
XWNNW13HL3/8 13.0 mm 28.0 mm PN 315 3/8" -18 NPT 15 mm 19 mm 34 mm L 21.0 mm
XWNNW16HL 20.0 mm 31.0 mm PN 315 1/2" -14 NPT 18 mm 24 mm 36 mm L 23.5 mm
XWNNW16HL3/4 18.5 mm 31.0 mm PN 315 3/4" -14 NPT 18 mm 24 mm 40 mm L 23.5 mm
XWNNW20HL 18.5 mm 35.0 mm PN 160 3/4" -14 NPT 22 mm 27 mm 42 mm L 27.5 mm
XWNNW25HL 24.0 mm 38.0 mm PN 160 1" -11.5 NPT 28 mm 36 mm 48 mm L 30.5 mm
XWNNW32HL 25.5 mm 45.0 mm PN 160 1.1/4" -11.5 NPT 35 mm 41 mm 54 mm L 34.5 mm
XWNNW40HL 26.0 mm 51.0 mm PN 160 1.1/2" -11.5 NPT 42 mm 50 mm 61 mm L 40.0 mm
XWNNW03HS 12.0 mm 23.0 mm PN 630 1/4" -18 NPT 6 mm 12 mm 26 mm S 16.0 mm
XWNNW04HS 15.0 mm 24.0 mm PN 630 1/4" -18 NPT 8 mm 14 mm 27 mm S 17.0 mm
XWNNW06HS 12.0 mm 25.0 mm PN 630 3/8" -18 NPT 10 mm 17 mm 28 mm S 17.5 mm
XWNNW08HS 12.5 mm 29.0 mm PN 630 3/8" -18 NPT 12 mm 17 mm 28 mm S 21.5 mm
XWNNW10HS 18.0 mm 30.0 mm PN 630 1/2" -14 NPT 14 mm 19 mm 34 mm S 22.0 mm
XWNNW13HS 19.0 mm 33.0 mm PN 400 1/2" -14 NPT 16 mm 24 mm 36 mm S 24.5 mm
XWNNW13HS3/4 20.0 mm 33.0 mm PN 400 3/4" -14 NPT 16 mm 24 mm 40 mm S 24.5 mm
XWNNW16HS 20.0 mm 37.0 mm PN 400 3/4" -14 NPT 20 mm 27 mm 42 mm S 26.6 mm
XWNNW20HS 24.0 mm 42.0 mm PN 400 1" -11.5 NPT 25 mm 36 mm 48 mm S 30.0 mm
XWNNW25HS 25.5 mm 49.0 mm PN 400 1.1/4" -11.5 NPT 30 mm 41 mm 54 mm S 35.5 mm
XWNNW32HS 26.0 mm 57.0 mm PN 315 1.1/2" -11.5 NPT 38 mm 50 mm 61 mm S 41.0 mm
Series: LL = Very light L = Light S = Heavy, PN = Nominal pressure PB = Max. operating pressure, Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.