XWRK

Screw-in fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSPT conical external threads
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Design Screw-in fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 thread seal
Sealing form 2 24° inner cone
Standard DIN 2353
ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name i mm L7 mm Operating pressure G External pipe Ø mm AF mm Series L5 mm Ø d2 mm L4 mm
Product Name i mm L7 mm Operating pressure G External pipe Ø mm AF mm Series L5 mm Ø d2 mm L4 mm
XWR 04 LL 8 15.0 PN 100 R 1/8" K 4 9 LL 17.0 4 11.0
XWR 05 LL 8 13.5 PN 100 R 1/8" K 5 9 LL 17.0 5 8.0
XWR 06 LL 8 15.0 PN 100 R 1/8" K 6 9 LL 17.0 6 9.5
XWR 08 LL 8 17.0 PN 100 R 1/8" K 8 12 LL 20.0 8 11.5
XWR 10 LL 12 21.0 PN 100 R 1/4" K 10 14 LL 26.0 10 15.5
XWR 12 LL 12 18.0 PN 100 R 1/4" K 12 17 LL 21.5 12 12.0
XWR NW 04 HL 8 19.0 PN 315 R 1/8" K 6 12 L 20.0 6 12.0
XWR NW 04 HL 1/4 12 21.0 PN 315 R 1/4" K 6 12 L 26.0 6 14.0
XWR NW 04 HL 3/8 12 24.0 PN 315 R 3/8" K 6 17 L 28.0 6 17.0
XWR NW 06 HL 12 21.0 PN 315 R 1/4" K 8 12 L 26.0 8 14.0
XWR NW 06 HL 1/8 8 21.0 PN 315 R 1/8" K 8 12 L 26.0 8 14.0
XWR NW 06 HL 3/8 12 26.0 PN 315 R 3/8" K 8 17 L 28.0 8 19.0
XWR NW 06 HL 1/2 13 27.0 PN 315 R 1/2" K 8 19 L 34.0 8 20.0
XWR NW 08 HL 12 22.0 PN 315 R 1/4" K 10 14 L 27.0 10 15.0
XWR NW 08 HL 1/8 8 22.0 PN 315 R 1/8" K 10 14 L 27.0 10 15.0
XWR NW 08 HL 3/8 12 24.0 PN 315 R 3/8" K 10 17 L 28.0 10 17.0
XWR NW 08 HL 1/2 14 30.0 PN 316 R 1/2" K 10 19 L 34.0 10 23.0
XWR NW 10 HL 12 24.0 PN 315 R 3/8" K 12 17 L 28.0 12 17.0
XWR NW 10 HL 1/4 12 24.0 PN 315 R 1/4" K 12 17 L 28.0 12 17.0
XWR NW 10 HL 1/2 14 30.0 PN 315 R 1/2" K 12 19 L 34.0 12 23.0
XWR NW 10 HL 3/4 16 35.0 PN 315 R 3/4" K 12 27 L 42.0 12 28.0
XWR NW 13 HL 14 28.0 PN 315 R 1/2" K 15 19 L 34.0 15 21.0
XWR NW 13 HL 1/4 12 28.0 PN 315 R 1/4" K 15 19 L 34.0 15 21.0
XWR NW 13 HL 3/8 12 28.0 PN 315 R 3/8" K 15 19 L 34.0 15 21.0
XWR NW 16 HL 14 31.0 PN 315 R 1/2" K 18 24 L 36.0 18 23.5
XWR NW 16 HL 3/8 12 31.0 PN 315 R 3/8" K 18 24 L 36.0 18 23.5
XWR NW 16 HL 3/4 16 35.0 PN 315 R 3/4" K 18 27 L 42.0 18 27.5
XWRK NW 20 HL 16 35.0 PN 160 R 3/4" K 22 27 L 42.0 22 27.5
XWR NW 03 HS 12 23.0 PN 400 R 1/4" K 6 12 S 26.0 6 16.0
XWR NW 04 HS 12 24.0 PN 400 R 1/4" K 8 14 S 27.0 8 17.0
XWR NW 06 HS 12 25.0 PN 400 R 3/8" K 10 17 S 28.0 10 17.5
XWR NW 08 HS 12 29.0 PN 400 R 3/8" K 12 17 S 28.0 12 21.5
XWR NW 08 HS 1/2 14 31.0 PN 400 R 1/2" K 12 19 S 34.0 12 23.5
XWR NW 10 HS 14 30.0 PN 400 R 1/2" K 14 19 S 32.0 14 22.0
XWR NW 13 HS 14 33.0 PN 400 R 1/2" K 16 24 S 32.0 16 24.5
XWR NW 16 HS 1/2 14 37.0 PN 400 R 1/2" K 20 27 S 42.0 20 26.5
XWR NW 13 HS 3/8 12 33.0 PN 400 R 3/8" K 16 24 S 32.0 16 24.5
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.