XWSA

Welded on fitting, angle 90°



Properties

Connection 1 Welded on socket for metric pipe
Connection 2 metric cylindrical outer thread
Design Welded on fitting
Construction Angle 90°
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard ISO 8434-1
Surface phosphate treated and oiled (Znphr5f)
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm Ø D1 mm L2 mm L3 mm L7 mm AF mm
Product Name Series Operating pressure Ø d2 mm Ø D1 mm L2 mm L3 mm L7 mm AF mm
XWSA NW 04 HL L PN 315 6 10 12,0 19 19 12
XWSA NW 06 HL L PN 315 8 12 14,0 23 21 12
XWSA NW 08 HL L PN 315 10 14 15,0 24 22 14
XWSA NW 10 HL L PN 315 12 16 17,0 25 24 17
XWSA NW 13 HL L PN 315 15 19 21,0 30 28 19
XWSA NW 16 HL L PN 315 18 22 23,5 33 31 24
XWSA NW 20 HL L PN 160 22 27 27,5 37 35 27
XWSA NW 25 HL L PN 160 28 32 30,5 42 38 36
XWSA NW 32 HL L PN 160 35 40 34,5 49 40 41
XWSA NW 40 HL L PN 160 42 46 40,0 57 51 50
XWSA NW 03 HS S PN 630 6 11 16,0 23 23 12
XWSA NW 04 HS S PN 630 8 13 17,0 24 24 14
XWSA NW 06 HS S PN 630 10 15 17,5 25 25 17
XWSA NW 08 HS S PN 630 12 17 21,5 29 29 17
XWSA NW 10 HS S PN 630 14 19 22,0 30 30 19
XWSA NW 13 HS S PN 400 16 21 24,5 33 33 24
XWSA NW 16 HS S PN 400 20 26 26,5 37 37 27
XWSA NW 20 HS S PN 400 25 31 30,0 42 42 36
XWSA NW 25 HS S PN 400 30 36 35,5 49 49 41
XWSA NW 32 HS S PN 315 38 44 41,0 57 57 50
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.