XWSA VA

Welded on fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 Welded on socket for metric pipe
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Design Welded on fitting
Material Stainless steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 2 24° inner cone
Standard ISO 8434-1

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L7 mm L2 mm Operating pressure L3 mm AF mm Series Ø d2 mm Ø D1 mm
Product Name L7 mm L2 mm Operating pressure L3 mm AF mm Series Ø d2 mm Ø D1 mm
XWSA NW 04 HL VA 19 12.0 PN 315 19 12 L 6 10
XWSA NW 06 HL VA 21 14.0 PN 315 23 12 L 8 12
XWSA NW 08 HL VA 22 15.0 PN 315 24 14 L 10 14
XWSA NW 10 HL VA 24 17.0 PN 315 25 17 L 12 16
XWSA NW 13 HL VA 28 21.0 PN 315 30 19 L 15 19
XWSA NW 16 HL VA 31 23.5 PN 315 33 24 L 18 22
XWSA NW 20 HL VA 35 27.5 PN 160 37 27 L 22 27
XWSA NW 25 HL VA 38 30.5 PN 160 42 36 L 28 32
XWSA NW 32 HL VA 40 34.5 PN 160 49 41 L 35 40
XWSA NW 40 HL VA 51 40.0 PN 160 57 50 L 42 46
XWSA NW 06 HS VA 25 17.5 PN 630 25 17 S 10 15
XWSA NW 08 HS VA 29 21.5 PN 630 29 17 S 12 17
XWSA NW 13 HS VA 33 24.5 PN 400 33 24 S 16 21
XWSA NW 16 HS VA 37 26.5 PN 400 37 27 S 20 26
XWSA NW 20 HS VA 42 30.0 PN 400 42 36 S 25 31
XWSA NW 25 HS VA 49 35.5 PN 400 49 41 S 30 36
XWSA NW 32 HS VA 57 41.0 PN 315 57 50 S 38 44
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.