XWV

Shuttle valve, connector



Properties

Connection 1 - 3 metric cylindrical outer thread
Design Shuttle valve, connector
Construction T shaped
Sealing form 1 - 3 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Surface electro galvanised
Material Steel

Description

With two lockable inlets and one outlet.

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm M Ø d mm L4 mm L7 mm S1
Product Name Series Operating pressure Ø d2 mm M Ø d mm L4 mm L7 mm S1
XWV NW 06 HL L PN 160 8 M 14 x 1.5 4,5 14,0 21 14
XWV NW 08 HL L PN 160 10 M 16 x 1.5 6,0 15,0 22 17
XWV NW 10 HL L PN 160 12 M 18 x 1.5 7,5 17,0 24 19
XWV NW 13 HL L PN 160 15 M 22 x 1.5 10,0 21,0 28 19
XWV NW 03 HS S PN 400 6 M 14 x 1.5 3,0 16,0 24 14
XWV NW 04 HS S PN 400 8 M 16 x 1.5 4,5 17,0 24 17
XWV NW 06 HS S PN 400 10 M 18 x 1.5 6,0 17,5 25 19
XWV NW 13 HS S PN 400 16 M 24 x 1.5 7,5 21,5 30 22
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.