XW VA

Fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 + 2 metric cylindrical outer thread
Construction Angle 90°
Design Fitting
Lieferumfang Socket (without union nut and cutting ring)
Material Stainless steel
Online-Shop https://shop.hansa-flex.com/de/XWVA
Sealing form 1 + 2 24° inner cone
Standard DIN 3905

Hints

Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen.

Article Table

Product Name L7 mm L2 mm Betriebsdruck Rohr-Außen Ø mm SW mm Baureihe
Product Name L7 mm L2 mm Betriebsdruck Rohr-Außen Ø mm SW mm Baureihe
XW04LLVA 15 mm 11.0 mm PN 100 4 mm 9 mm LL
XW06LLVA 15 mm 9.5 mm PN 100 6 mm 9 mm LL
XW08LLVA 17 mm 11.5 mm PN 100 8 mm 12 mm LL
XWNW04HLVA 19 mm 12.0 mm PN 315 6 mm 12 mm L
XWNW06HLVA 21 mm 14.0 mm PN 315 8 mm 12 mm L
XWNW08HLVA 22 mm 15.0 mm PN 315 10 mm 14 mm L
XWNW10HLVA 24 mm 17.0 mm PN 315 12 mm 17 mm L
XWNW13HLVA 28 mm 21.0 mm PN 315 15 mm 19 mm L
XWNW16HLVA 31 mm 23.5 mm PN 315 18 mm 24 mm L
XWNW20HLVA 35 mm 27.5 mm PN 160 22 mm 27 mm L
XWNW25HLVA 38 mm 30.5 mm PN 160 28 mm 36 mm L
XWNW32HLVA 45 mm 34.5 mm PN 160 35 mm 41 mm L
XWNW40HLVA 51 mm 40.0 mm PN 160 42 mm 50 mm L
XWNW03HSVA 23 mm 16.0 mm PN 630 6 mm 12 mm S
XWNW04HSVA 24 mm 17.0 mm PN 630 8 mm 14 mm S
XWNW06HSVA 25 mm 17.5 mm PN 630 10 mm 17 mm S
XWNW08HSVA 29 mm 21.5 mm PN 630 12 mm 17 mm S
XWNW10HSVA 30 mm 22.0 mm PN 630 14 mm 19 mm S
XWNW13HSVA 33 mm 24.5 mm PN 400 16 mm 24 mm S
XWNW16HSVA 37 mm 26.5 mm PN 400 20 mm 27 mm S
XWNW20HSVA 42 mm 30.0 mm PN 400 25 mm 36 mm S
XWNW25HSVA 49 mm 35.5 mm PN 400 30 mm 41 mm S
XWNW32HSVA 57 mm 41.0 mm PN 315 38 mm 50 mm S
Series: LL = Very light L = Light S = Heavy, PN = Nominal pressure PB = Max. operating pressure, Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.