W90 HMO HB

Screw-in socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 BSP cylindrical external threads
Construction Angle 90°
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 60° inner cone
Surface electro galvanised

Article Table

Product Name G2 S1 AF mm G1 OR
Product Name G2 S1 AF mm G1 OR
W90 HMO 10 HB 02 G 1/8" -28 14 11 M 10 x 1 8.00 x 1.50
W90 HMO 12 HB 02 G 1/8" -28 14 18 M 12 x 1,5 9.30 x 2.40
W90 HMO 12 HB 04 G 1/4" -19 17 14 M 12 x 1,5 9.30 x 2.40
W90 HMO 14 HB 04 G 1/4" -19 19 17 M 14 x 1.5 11.30 x 2.40
W90 HMO 14 HB 06 G 3/8" -19 19 24 M 14 x 1.5 11.30 x 2.40
W90 HMO 16 HB 04 G 1/4" -19 20 17 M 16 x 1.5 13.30 x 2.40
W90 HMO 16 HB 06 G 3/8" -19 20 17 M 16 x 1.5 13.30 x 2.40
W90 HMO 18 HB 06 G 3/8" -19 24 19 M 18 x 1.5 15.30 x 2.40
W90 HMO 18 HB 08 G 1/2" -14 24 19 M 18 x 1.5 15.30 x 2.40
W90 HMO 20 HB 08 G 1/2" -14 27 19 M 20 x 1.5 17.30 x 2.40
W90 HMO 22 HB 08 G 1/2" -14 27 19 M 22 x 1.5 19.30 x 2.40
W90 HMO 22 HB 12 G 3/4" -14 27 27 M 22 x 1.5 19.30 x 2.40
W90 HMO 33 HB 16 G 1" -11 41 33 M 33 x 2 29.74 x 2.95
W90 HMO 42 HB 20 G 1.1/4" -11 50 41 M 42 x 2 38.00 x 3.00
W90 HMO 48 HB 24 G 1.1/2" -11 55 48 M 48 x 2 44.00 x 3.00
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.