GE HN HJOF

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT external threads
Connection 2 ORFS external threads
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 thread seal
Sealing form 2 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name G2 OR AF mm G1
Product Name G2 OR AF mm G1
GE HN 02 HJOF 04 Screw-in sockets; Steel 9/16"-18 UNF 7.65 x 1.78 16 1/8" -27 NPT
GE HN 04 HJOF Screw-in sockets; Steel 9/16"-18 UNF 7.65 x 1.78 16 1/4" -18 NPT
GE HN 04 HJOF 06 Screw-in sockets; Steel 11/16" -16 UN 9.25 x 1.78 19 1/4" -18 NPT
GE HN 06 HJOF Screw-in sockets; Steel 11/16" -16 UN 9.25 x 1.78 19 3/8" -18 NPT
GE HN 06 HJOF 08 Screw-in sockets; Steel 13/16" -16 UN 12.42 x 1.78 22 3/8" -18 NPT
GE HN 08 HJOF 06 Screw-in sockets; Steel 11/16" -16 UN 9.25 x 1.78 22 1/2" -14 NPT
GE HN 08 HJOF Screw-in sockets; Steel 13/16" -16 UN 12.42 x 1.78 22 1/2" -14 NPT
GE HN 08 HJOF 10 Screw-in sockets; Steel 1" -14 UNS 15.60 x 1.78 27 1/2" -14 NPT
GE HN 12 HJOF 08 Screw-in sockets; Steel 13/16" -16 UN 12.42 x 1.78 29 3/4" -14 NPT
GE HN 12 HJOF 10 Screw-in sockets; Steel 1" -14 UNS 15.60 x 1.78 29 3/4" -14 NPT
GE HN 12 HJOF Screw-in sockets; Steel 1.3/16" -12 UN 18.77 x 1.78 32 3/4" -14 NPT
GE HN 12 HJOF 16 Screw-in sockets; Steel 1.7/16" -12 UN 23.52 x 1.78 38 3/4" -14 NPT
GE HN 16 HJOF 12 Screw-in sockets; Steel 1.3/16" -12 UN 18.77 x 1.78 35 1" -11.5 NPT
GE HN 16 HJOF Screw-in sockets; Steel 1.7/16" -12 UN 23.52 x 1.78 38 1" -11.5 NPT
GE HN 20 HJOF Screw-in sockets; Steel 1.11/16" -12 UN 29.87 x 1.78 48 1.1/4" -11.5 NPT
GE HN 24 HJOF Screw-in sockets; Steel 2" -12 UN 37.82 x 1.78 54 1.1/2" -11.5 NPT
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.