FI MD GEH

High pressure filter 400bar

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design without bypass valve, without clogging indicator
Material Filter head of GGG
Scope of supply without filter element
Temp. max. 120 °C
Temp. min. -10 °C

Description

Pressure filter for pipeline installation
Connector for clogging indicator M20 x 1.5 sealed with bolt

Hints

Dimension “L”: clearance required for changing the filter element

Article Table

Product Name L1 mm L2 mm L mm Operating pressure bar AF mm G1 Ø A mm for filter type Ø B mm Weight kg
Product Name L1 mm L2 mm L mm Operating pressure bar AF mm G1 Ø A mm for filter type Ø B mm Weight kg
FI MD GEH N 040 050 G12 189.0 31.0 80.0 315 27 G 1/2" 92.0 FI MD 040, 050 66.0 3.600
FI MD GEH N 060 075 G34 267.0 31.0 80.0 315 27 G 3/4" 92.0 FI MD 060, 080 66.0 3.900
FI MD GEH N 080 090 G34 343.0 31.0 80.0 315 27 G 3/4" 92.0 FI MD 080, 090 66.0 5.100
FI MD GEH N 170 190 G114 257.0 32.0 110.0 210 27 G 1.1/4" 142.0 FI MD 170, 190 109.0 8.500
FI MD GEH N 240 260 G114 371.0 32.0 110.0 210 30 G 1.1/4" 142.0 FI MD 240, 260 109.0 15.300
BD = Working pressure

Order hints

Filter element is not included. Please order separately.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.