HK MPS R/S

Filter head for spin-on filter MPS

  • Image_1 Image_1

Properties

Material Aluminium

Description

With these filter heads, spin-on filters can be used as return flow filters (R) or suction filters (S)
Opening pressure of bypass valve for return filter (R): 1.75 bar
Opening pressure of bypass valve for suction filter (S): 0.3 bar

Article Table

Product Name Line connection suitable for filter type MPS Version Weight kg
Product Name Line connection suitable for filter type MPS Version Weight kg
HK MPS 050 070 RG1 G 3/4” 050-070 as return filter 0.360
HK MPS 100 150 RG1 G 1.1/4” 100-150 as return filter 1.000
HK MPS 200 250 RG1 G 1.1/2” 200-250 as return filter 1.220
HK MPS 300 350 RG1 G 1.1/2” 300-350 as return filter 2.860
HK MPS 050 070 SG1 G 3/4” 050-070 as suction filter 0.360
HK MPS 100 150 SG1 G 1.1/4” 100-150 as suction filter 1.000
HK MPS 200 250 SG1 G 1.1/2” 200-250 as suction filter 1.220
HK MPS 300 350 SF1 1.1/2" SAE 3000 PSI/M 300-350 as suction filter 2.860

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.