HK MPS 3

Spin-on filter type 3

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design as return filter
with bypass valve 1.75 bar, without clogging indicator
A10: with inorganic filter (10 μm), absolute filtration
P10: paper filter (10 μm), nominal filtration
Material Filter head in aluminum
Gasket: NBR
Operating pressure 12 bar
Temp. max. 110 °C
Temp. min. -25 °C

Description

Spin-on filters for pipeline installation
Pressure differential for paper filter element (P) max. 4 bar
Pressure differential for filter inorganic element (A) max. 4 bar
Design (Qmax.) for medium ISO VG 46 <br>at 50°C (30 mm2/s) at Δptot = 0.4 bar

Hints

For utilization as a suction filter a suction filter head FI SP S FK *** must be used.

Article Table

Product Name D mm E mm C mm A mm Line connection Filter material Filter area Volumetric flow max. l/min Filter mesh size µm B mm Weight kg
Product Name D mm E mm C mm A mm Line connection Filter material Filter area Volumetric flow max. l/min Filter mesh size µm B mm Weight kg
HK MPS 300 RG1 P10 130 129 290 265 G 1.1/2” organisch 2 x 4300 cm² 282 10.0 47 5.400
HK MPS 350 RG1 A10 130 129 335 310 G 1.1/2” non-organic 2 x 5390 cm² 250 10.0 47 5.600
HK MPS 350 RG1 P10 130 129 335 310 G 1.1/2” organisch 2 x 5760 cm² 293 10.0 47 5.600
A10 with inorganic filter (10 µm), absolute filtration
P10 paper filter (10 µm), nominal filtration
Qmax - max intake volumetric flow

Order hints

Other filter materials and filters for other types of oil, viscosities or temperatures available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.