FI SG E MP

Filter element for suction filter MP

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design without bypass valve
Filter material Wire mesh
Material Gasket: NBR
Operating pressure 12 bar
Temp. max. 110 °C
Temp. min. -25 °C

Description

These filters protect hydraulic pumps from coarse dirt from the tank. They are flush-mounted the tank.

Article Table

Product Name L mm AF mm G1 Filter area cm² Volumetric flow max. l/min Filter mesh size µm Ø B mm Weight kg
Product Name L mm AF mm G1 Filter area cm² Volumetric flow max. l/min Filter mesh size µm Ø B mm Weight kg
FI SG E MP 0078 M90 79.0 30 G 3/8" 290 20 90 52.0 0.160
FI SG E MP 0078 M90 1/2 79.0 30 G 1/2" 290 28 90 52.0 0.160
FI SG E MP 0095 M90 1/2 95.0 41 G 1/2" 470 28 90 70.0 0.160
FI SG E MP 0095 M90 3/4 95.0 41 G 3/4" 470 66 90 70.0 0.220
FI SG E MP 0135 M90 11/4 137.0 69 G 1.1/4" 1046 170 90 99.0 0.470
FI SG E MP 0135 M90 11/2 137.0 69 G 1.1/2" 1046 170 90 99.0 0.470
FI SG E MP 0140 M90 3/4 141.0 41 G 3/4" 720 66 90 70.0 0.300
FI SG E MP 0140 M90 1 141.0 41 G 1" 720 130 90 70.0 0.300
FI SG E MP 0140 M250 1 141.0 41 G 1" 720 900 250 70.0 0.300
FI SG E MP 0140 M90 11/2 160.0 70 G 1.1/2" 2000 250 90 130.0 0.840
FI SG E MP 0140 M90 2 160.0 70 G 2" 2000 470 90 130.0 0.840
FI SG E MP 0225 M90 11/4 227.0 69 G 1.1/4" 1850 170 90 99.0 0.680
FI SG E MP 0225 M90 11/2 227.0 69 G 1.1/2" 1850 250 90 99.0 0.680
FI SG E MP 0225 M90 2 227.0 69 G 2" 1850 470 90 99.0 0.680
FI SG E MP 0262 M90 2 262.0 69 G 2" 3550 470 90 130.0 1.250
FI SG E MP 0270 M90 21/2 272.0 101 G 2.1/2" -11 3550 840 90 130.0 1.250
FI SG E MP 0270 M90 3 272.0 101 G 3" -11 3620 980 90 130.0 1.250
FI SG E MP 0330 M90 3 330.0 101 G 3" -11 4160 980 90 130.0 1.300
Qmax - max intake volumetric flow

Order hints

Available on request: Other filter mesh sizes, other threads, filter with bypass or magnet

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.