GD (3000/6000 PSI)

SAE block flange, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction Angle 90°
Design SAE block flange
Material S355J2G3 (ST52.3)
Mounting Inner thread for metric screws
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name E1 mm Size PB 10.9 bar L mm C mm Ø B mm M metr. D mm S2 mm Pressure series G mm E2 mm S1 mm F mm
Product Name E1 mm Size PB 10.9 bar L mm C mm Ø B mm M metr. D mm S2 mm Pressure series G mm E2 mm S1 mm F mm
GD 304 30.2 1.1/4" 250 13.0 58.7 32 M 10 82 38 3000 PSI 80 30.2 39 82
GD 305 35.7 1.1/2" 200 13.5 69.9 38 M 12 98 59 3000 PSI 92 35.7 51 92
GD 306 42.9 2" 200 14.0 77.8 46 M 12 102 48 3000 PSI 87 42.9 51 85
GD 602 23.8 3/4" 400 11.0 50.8 19 M 10 72 36 6000 PSI 55 23.8 32 60
GD 603 27.8 1" 400 14.0 57.2 23 M 12 82 40 6000 PSI 64 27.8 37 68
GD 604 31.8 1.1/4" 400 16.0 66.7 30 M 14 96 46 6000 PSI 72 31.8 41 76
GD 605 36.5 1.1/2" 400 18.0 79.4 38 M 16 114 52 6000 PSI 89 36.5 50 86
GD 606 44.5 2" 400 21.0 96.8 50 M 20 133 70 6000 PSI 105 44.5 59 110
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.