WFG JIC (6000 PSI)

SAE flange adapter, forged

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction Angle 90°
Construction type forged
Design SAE flange adapter
Material S355J2G3 (ST52.3)
Pressure series 6000 psi
Scope of supply flange only
Standard SAE J 518 C
ISO 6162
Surface electro galvanised

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Size PB 10.9 bar E mm L mm M metr. A M unc S2 mm F1 mm S1 mm B2 mm B1 mm L Footn
Product Name Size PB 10.9 bar E mm L mm M metr. A M unc S2 mm F1 mm S1 mm B2 mm B1 mm L Footn
WFG 6001 JIC 3/4 1/2" 400 18.2 8.7 M 8 x 30 UNF 3/4" -16 5/16" x 1.1/4" 38 61.6 39 13 9.9 -
WFG 6001 JIC 7/8 1/2" 400 18.2 8.7 M 8 x 35 UNF 7/8" -14 5/16" x 1.1/4" 38 61.6 39 13 12.3 -
WFG 6002 JIC 1 1/16 3/4" 400 23.8 10.7 M 10 x 35 UNF 1 1/16" -12 3/8" x 1.1/2" 48 78.0 48 17 15.5 -
WFG 6002 JIC 1 5/16 3/4" 400 23.8 10.7 M 10 x 35 UN 1.5/16" -12 3/8" x 1.1/2" 48 78.0 48 17 21.5 -
WFG 6002 JIC 7/8 3/4" 400 23.8 10.7 M 10 x 35 UNF 7/8" -14 3/8" x 1.1/2" 48 78.0 48 17 12.3 -
WFG 6003 JIC 1 1/16 1" 400 27.8 - M 12 x 45 UNF 1 1/16" -12 7/16" x 1.3/4" 60 99.0 60 24 15.5 = Choice of 12.0 or 12.5
WFG 6003 JIC 1 5/16 1" 400 27.8 - M 12 x 45 UN 1.5/16" -12 7/16" x 1.3/4" 60 99.0 60 24 21.5 = Choice of 12.0 or 12.5
WFG 6003 JIC 1 5/8 1" 400 27.8 - M 12 x 45 UN 1.5/8" -12 7/16" x 1.1/2" 60 99.0 60 24 27.5 = Choice of 12.0 or 12.5
WFG 6004 JIC 1 5/16 1.1/4" 400 31.8 - M 14 x 50 UN 1.5/16" -12 1/2" x 1.3/4" 68 115.5 68 30 21.5 = Choice of 13.5 or 14.5
WFG 6004 JIC 1 5/8 1.1/4" 400 31.8 - M 14 x 50 UN 1.5/8" -12 1/2" x 1.3/4" 68 115.5 68 30 27.5 = Choice of 13.5 or 14.5
WFG 6004 JIC 1 7/8 1.1/4" 400 31.8 - M 14 x 50 UN 1.7/8" -12 1/2" x 1.3/4" 68 115.5 68 30 33.0 = Choice of 13.5 or 14.5
WFG 6005 JIC 1 5/8 1.1/2" 400 36.5 17.0 M 16 x 55 UN 1.5/8" -12 5/8" x 2" 76 133.0 76 32 27.5 -
WFG 6005 JIC 1 7/8 1.1/2" 400 36.5 17.0 M 16 x 55 UN 1.7/8" -12 5/8" x 2" 76 133.0 76 32 33.0 -
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.