WFG (3000 PSI)

SAE flange adapter, forged

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction Angle 90°
Construction type forged
Design SAE flange adapter
Material S355J2G3 (ST52.3)
Pressure series 3000 psi
Scope of supply flange only
Standard DIN 3901/3902
Surface electro galvanised

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Ø RAD mm Size PB 10.9 bar S3 mm L mm S2 mm M metr. A F1 mm I mm S1 mm Series B2 mm B1 mm L Footn M metr. Footn
Product Name Ø RAD mm Size PB 10.9 bar S3 mm L mm S2 mm M metr. A F1 mm I mm S1 mm Series B2 mm B1 mm L Footn M metr. Footn
WFG 3001/L 15 15 1/2" 315 44 8.7 29.0 M 8 x 25 M 22 x 1.5 66.8 7.0 39 L 11 12 - -
WFG 3002/L 18 18 3/4" 315 48 10.7 31.5 M 10 x 35 M 26 x 1.5 73.9 7.5 42 L 19 15 - -
WFG 3002/L 22 22 3/4" 160 50 10.7 33.5 M 10 x 35 M 30 x 2 75.9 7.5 42 L 19 19 - -
WFG 3003/L 28 28 1" 160 53 10.7 36.5 M 10 x 35 M 36 x 2 82.2 7.5 45 L 25 24 - -
WFG 3004/L 35 35 1.1/4" 160 68 - 46.5 *2 M 45 x 2 104.3 10.5 50 L 27 30 = Choice of 10.5 or 12.5 = Choice of M 10 x 30 or M 12 x 40
WFG 3005/L 42 42 1.1/2" 160 57 13.5 47.0 M 12 x 40 M 52 x 2 118.2 11.0 55 L 36 36 - -
WFG 3001/S 16 16 1/2" 350 48 8.7 29.5 M 8 x 25 M 24 x 1.5 70.8 8.5 39 S 11 12 - -
WFG 3002/S 20 20 3/4" 350 54 10.7 32.5 M 10 x 35 M 30 x 2 79.9 10.5 42 S 19 16 - -
WFG 3002/S 25 25 3/4" 350 57 10.7 33.0 M 10 x 35 M 36 x 2 82.9 12.0 42 S 19 17 - -
WFG 3003/S 25 25 1" 315 62 10.7 38.0 M 10 x 35 M 36 x 2 91.2 12.0 45 S 25 20 - -
WFG 3003/S 30 30 1" 315 63 10.7 36.5 M 10 x 35 M 42 x 2 92.2 13.5 45 S 25 24 - -
WFG 3004/S 25 25 1.1/4" 250 67 - 43.0 *2 M 36 x 2 103.3 12.0 50 S 27 20 = Choice of 10.5 or 12.5 = Choice of M 10 x 30 or M 12 x 40
WFG 3004/S 30 30 1.1/4" 250 70 - 43.5 *2 M 42 x 2 106.3 13.5 50 S 27 25 = Choice of 10.5 or 12.5 = Choice of M 10 x 30 or M 12 x 40
WFG 3004/S 38 38 1.1/4" 250 74 - 43.0 *2 M 52 x 2 110.3 16.0 50 S 27 28 = Choice of 10.5 or 12.5 = Choice of M 10 x 30 or M 12 x 40
WFG 3005/S 38 38 1.1/2" 200 58 13.5 48.0 M 12 x 40 M 52 x 2 128.2 16.0 55 S 36 32 - -
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø RAD = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.