AFS 90 S (3000 PSI)

SAE socket weld flange, angle 90

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction Angle 90°
Design SAE socket weld flange
Material S355J2G3 (ST52.3)
Mounting Screw bore hole
Pressure series 3000 psi
Scope of supply flange only
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB bar Size Ø B mm E mm L mm S2 mm M metr. C mm F1 mm S1 mm M unc Ø A mm I mm
Product Name PB bar Size Ø B mm E mm L mm S2 mm M metr. C mm F1 mm S1 mm M unc Ø A mm I mm
AFS 80/90 S 350 1/2" 13 SAE socket weld flange, angle 90; flange only; S355J2G3 (ST52.3) 17.5 9.0 37 M 8 x 30 38.1 60 20 5/16" x 1.1/4" 21.6 10
AFS 80/90 S 038 350 1/2" 13 SAE socket weld flange, angle 90; flange only; S355J2G3 (ST52.3) 17.5 9.0 37 M 8 x 30 38.1 60 20 5/16" x 1.1/4" 17.5 10
AFS 100/90 S 350 3/4" 19 SAE socket weld flange, angle 90; flange only; S355J2G3 (ST52.3) 22.2 11.0 38 M 10 x 35 47.6 63 24 3/8" x 1.1/2" 27.2 10
AFS 102/90 S 315 1" 25 SAE socket weld flange, angle 90; flange only; S355J2G3 (ST52.3) 26.2 11.0 43 M 10 x 35 52.4 70 28 3/8" x 1.1/2" 34 12
AFS 104/90 S 250 1.1/4" 32 SAE socket weld flange, angle 90; flange only; S355J2G3 (ST52.3) 30.2 11.5 51 M 10 x 40 58.7 85 34 7/16" x 1.1/2" 42.8 14
AFS 106/90 S 200 1.1/2" 38 SAE socket weld flange, angle 90; flange only; S355J2G3 (ST52.3) 35.7 13.5 56 M 12 x 45 69.9 95 38 1/2" x 1.3/4" 48.6 16
AFS 108/90 S 200 2" 51 SAE socket weld flange, angle 90; flange only; S355J2G3 (ST52.3) 42.9 13.5 65 M 12 x 45 77.8 110 42 5/8" x 2" 61.0 18
PN = Nominal pressure
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.